Advanced Technical Finishing Receives Nadcap Accreditation
Receives accreditation for MIL-A-8625 Anodic Coatings for Aluminum and Aluminum Alloys, and MIL-DT-5541 Chemical Conversion Coatings on Aluminum and Aluminum Alloys.
Share
Advanced Technical Finishing, in Huntsvilla, AL has successfully received Nadcap accreditation for MIL-A-8625 Anodic Coatings for Aluminum & Aluminum Alloys and MIL-DT-5541 Chemical Conversion Coatings on Aluminum and Aluminum Alloys.
Featured Content
The addition of the Nadcap accreditation to the company’s existing quality systems, which include AS9100 Rev. C and ISO9001:2008, exemplifies Advanced Technical Finishing’s commitment to ongoing quality by satisfying the robust requirements of the industry and the aerospace clientele, said said Joe Pinto, Vice President and Chief Operating Officer at the Performance Review Institute
“Achieving Nadcap accreditation is not easy; it is one of the ways in which the aerospace industry identifies those who excel at manufacturing quality product through superior special processes. Companies such as Advanced Technical Finishing work hard to obtain this status and they should be justifiably proud of it,” Pinto said. “PRI is proud to support continual improvement in the aerospace industry by helping companies such as Advanced Technical Finishing be successful and we look forward to continuing to assist the industry moving forward.”
Headquartered in Huntsville, Alabama, Advanced Technical Finishing, LLC specializes in top-quality customized metal finishing treatments with exceptional capabilities in mechanical and chemical surface preparation, surface treatments, electroplating, post finishing procedures, painting of components, testing and certification. Serving the aerospace, medical, transportation, military and defense industries, Advanced Technical Finishing’s high-precision, focused efforts ensure quality and dependability where it matters most.
Visit their website HERE
RELATED CONTENT
-
What is the Correct Anodizing Specification?
My company fabricates aluminum and steel pedestrian bridge railing among other bridge parts. We recently got an aluminum railing job that called for “Type I” anodizing per MIL-A-8625. There was no anodic coating thickness called out. We are not anodizers and we are at a loss as to how to write up a meaningful anodizing specification for this railing.
-
Anodizing for Bonding Applications in Aerospace
Anodizing for pre-prep bonding bridges the gap between metallic and composite worlds, as it provides a superior surface in many applications on aluminum components for bonding to these composites.
-
Fixing Corrosion Between Anodized Aluminum and Steel
Anne Deacon Juhl, Ph.D., with AluConsult, says Galvanic corrosion is due to an electrical contact with a more noble metal or a nonmetallic conductor in a conductive environment.
