End Market Report

Article From: MoldMaking Technology, , from Mountaintop Economics & Research Inc.

Posted on: 2/1/2013

Medical & Consumer Products

CLICK IMAGE TO ENLARGE (+)

Production of Medical Equipment and Supplies Will Rise
After expanding by a hearty 8% in 2012, the total U.S. output of medical equipment and supplies will expand by another 8% in 2013. The market for medical products will be significantly affected for the foreseeable future by the Affordable Care Act (a.k.a. the ACA or Obamacare). It is estimated that the ACA will ultimately generate 30 to 40 million new customers for medical products and services because they will now receive health insurance. Obama says this will result in a savings for taxpayers in the long run, but I suspect this is wrong. I predict that the total amount of money spent on healthcare in this country is going to rise.

For manufacturers of plastics medical products this could be good news. This is because the rapidly rising costs of healthcare will generate demand for products that lower these costs to the insurers. There are several ways that plastics products can achieve these kinds of savings, and most of the savings stem from the fact that plastics products add simplicity to the highly complex problem of keeping Americans healthy.

One method that insurers will utilize to lower healthcare costs is to reduce the amount of time patients spend in the hospital. Thus, many types of medical equipment and supplies will be sold directly to consumers through retail outlets in much the same way that prescription drugs are now. This will also spur demand for new, low-cost devices that monitor and communicate medical information between patients at home and doctors in the hospital.

Another way to contain costs is to reuse or recycle medical supplies. A large percentage of the plastic supplies that are currently sold to healthcare providers are considered disposable. But resins prices are rising, and so are disposal costs. Many of the plastic products can be redesigned, so they can be sterilized and used multiple times, or integrated into the recycling stream.

Output of Consumer Products Will Gradually Improve
Total U.S. production of plastics consumer products will gradually accelerate in 2013. The growth rate in the output of these products slowed to just over 1% in 2012, but our latest forecast calls for growth of over 2% in 2013. This forecast is based on a couple of long-term trends that should keep this segment expanding for several years.

The most important factors that drive overall demand for consumer products are the trends in the residential real estate and construction sectors. Activity levels in these industries were subdued for most of the past five years. But the trends turned the corner in 2012 and are now poised for a more robust recovery. This is good news for all aspects of the American economy, and manufacturers of consumer products will be amongst the largest beneficiaries.

Another factor that is a positive for U.S. suppliers of these products is the accelerating development of the natural gas industry in this country. In the near future most of the plastic resin in this country will be manufactured from natural gas-based derivatives, and this should result in lower resins costs. Cheaper natural gas will also lower the costs of electricity and transportation fuels. Low-cost countries that export consumer goods (i.e. China) will still be major players in the consumer products segment. But due to the decline in overall manufacturing costs in the U.S., the production of many types of these products in the future will stay close to this market, and the trend of increased re-shoring will also continue.

 


Learn More

Editor's Picks

Overall Business Remains Unchanged

Total Mold Business Index for November 2012: 45.8

Related Suppliers


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved