A Cleaner Audi TT
You may recall the contaminated water emergency that occurred earlier this month in and around Toledo, Ohio.
You may recall the contaminated water emergency that occurred earlier this month in and around Toledo, Ohio. The cause were toxins generated by algae, which bloomed in abundance due to the run off of things like fertilizer and other chemicals.
It’s called “eutrophication.”
Featured Content
Which I didn’t know until I started reading about the forthcoming Audi TT and the lifecycle assessment that Audi has conducted on the coupe.
Said Prof. Dr. Ulrich Hackenberg, board member for Technical Development at Audi, “Our goal is to reduce significantly the overall emissions of each model compared with its predecessor. However, it’s not just a matter of what comes out of the exhaust pipe. At Audi, we look at the entire product and process chain associated with mobility.”
Turns out that nitrogen oxides can contribute to the potential of eutrophication, as well as petrochemical ozone creation and acidification.
Yes, this is in German, but you can probably figure out the steel and the aluminum. Or you can just use Google Translate.
One of the ways that Audi addresses environmental impacts with the new TT is through lightweight construction. The new car weighs 2711.69 lb., which is 110.23 lb. lighter than the car it replaces.
To achieve a light structure, the company is using high-strength and ultra-high-strength steels for the front end and underbody and aluminum for structural and add-on parts.
They reckon that in the manufacturing process for the TT they’re reducing greenhouse gas emissions by approximately 9%, or 1,763.7 lb., and that overall, the third-gen TT has a lifecycle savings 6.05 tons of greenhouse gases.
Were there more companies like Audi, chances are concerns about drinking water would be less of a consideration.
RELATED CONTENT
-
Development of a Sustainability Metrics System and a Technical Solution Method for Sustainable Metal Finishing: AESF Research Project #R-121, 6th Quarterly Report
The NASF Research Board has funded a research grant at Wayne State University on sustainability in the surface finishing industry, under the direction of Professor Yinlun Huang. The objective of the work is to create a surface-finishing-specific sustainability metrics system to measure economic, environmental and social sustainability. In this report, a benchmarking study of five plants was undertaken to illustrate how the sustainability assessment works.
-
RoHS and ELV Compliant Electroless Nickel
Over the past few years, a number of new environmental directives have come out of Europe and Asia encompassing mainly the automotive and electronics industries.
-
Vacuum Deposition and Coating Options
This overview takes a look at vacuum deposition technologies as processes that may be used to create coatings that can be substituted for or enhances the properties of electroplated coatings. Initially, this work discusses trends in metal finishing and environmental regulation.