Greenkote Adds Major Anti-Corrosion Coating Capacity in Ohio
The company says that the added equipment will multiply current capacity by nearly two and a half times, enabling the Brook Park facility to process more than 150 tons of parts per month.
#masking
Share
Greenkote PLC, a provider of advanced anti-corrosion metal coatings, says that it has more than doubled the capacity at its headquarters production facility in Brook Park, Ohio. The company says that the expansion has come in response to increasing demands from the industry.
Featured Content
“Greenkote usage is showing a strong rise in the markets we serve,” says Greenkote CEO Mark Gore. “Over the past year we’ve seen a steady increase in orders for anti-corrosion and metal protection coatings, and our new state-of-the-art coating line will help us keep pace with the need.”
The company says that the added equipment will multiply current capacity by nearly two and a half times, enabling the Brook Park facility to process more than 150 tons of parts per month. It will also provide for the application of specialized topcoats and sealers to the Greenkote coatings to further enhance the coating performance.
Greenkote PLC provides coating services for construction, automotive, rail, utilities and a range of other industries in which products are exposed to harsh and corrosive environments. Greenkote can be applied to a broad range of metal parts, from threaded fasteners to stamped and cast pieces, in sizes from 0.2 to 78 inches.
RELATED CONTENT
-
Improving Transfer Efficiencies in Coating Operations
There are many methods for addressing electrostatic grounding in metal painting processes, and Tim Ulshafer from Mueller Electric says the best method for your process is a simple and worthwhile exercise.
-
A Current Affair: Examining the "No Amperage" Phenomenon
If you are performing a coating process that requires the use of a rectifier, you may have experienced the "no amperage" problem. Here's a look at the phenomenon and some solutions…
-
Masking for Surface Finishing
Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.
