PF Blog

Manufacturing Energy Use, Intensity Down

By: Derek Korn
27. March 2013

Total energy consumption in the U.S. manufacturing sector decreased by 17 percent from 2002 to 2010, according to data released by the U.S. Energy Information Administration. Manufacturing gross output decreased by only 3 percent over the same period. Taken together, these data indicate a significant decline in the amount of energy used per unit of gross manufacturing output. The significant decline in energy intensity reflects both improvements in energy efficiency and changes in the manufacturing output mix. Consumption of every fuel used for manufacturing declined over this period.

The broad U.S. manufacturing sector comprised over 11 percent of gross domestic product (GDP) in 2010. It includes energy-intensive industries (those that use relatively large amounts of energy) such as petroleum refining, chemicals, aluminum, iron and steel, paper, wood products, and food, as well as less energy-intensive industries such as textiles, leather, apparel, furniture, machinery and electrical equipment.

Energy for manufacturing can be consumed in two ways: as a fuel or as a feedstock (material input to a final product). Energy consumed as a fuel includes all energy used for heat and power. Energy used as feedstock is the use of energy sources for raw material input or for any purpose other than the production of heat or power.

U.S. manufacturing used over 14 quadrillion BTU of energy as a fuel in 2010, a decrease of 13 percent from the 2002 level. Fuel consumption in the five most energy-intensive subsectors accounted for 81 percent of fuel use in manufacturing. Two energy-intensive subsectors (petroleum and coal products and food) showed 3.5 percent increases in their fuel consumption from 2002 to 2010.

Feedstock energy use in U.S. manufacturing accounts for more than 6 percent of all energy consumed in the country. Although nearly all manufacturers use energy as a fuel, 99 percent of feedstock energy use occurs in only three manufacturing subsectors: primary metals, chemicals, and petroleum and coal products.

Here’s a link to the complete survey.
 

Comments are reviewed by moderators before they appear to ensure they meet Products Finishing’s submission guidelines.
blog comments powered by Disqus

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved