Van Nuys plater hit with $100K fine

News Item From: Products Finishing

Posted on: 7/28/2011

Crown Chrome Plating fails 2009 inspection

The U.S. Environmental Protection Agency fined TMW Corporation, 14660 Arminta Street, Van Nuys, $100,000, for violations of the Resource Conservation and Recovery Act.
 
The violations were discovered at the company’s facility, Crown Chrome Plating, a Division of TMW Corporation, during an inspection conducted by EPA in April 2009.   The facility, which does metal plating primarily for the aerospace industry, is located in a light industrial zone of Van Nuys, a San Fernando Valley community of approximately 136,000 residents.
 
“The toxic wastes and sludges at the Crown Chrome facility have the potential to pose a danger to employees, the surrounding community and the environment,” said Jared Blumenfeld, the EPA’s Regional Administrator for the Pacific Southwest. “EPA is committed to enforcing the federal laws that require all companies to properly store and handle their hazardous wastes.”
 
The EPA says TMW Corporation generated multiple hazardous wastes including, paint wastes, alkaline and acidic corrosive liquids, and sludges containing heavy metals such as chromium and lead. These hazardous wastes, and the waste handling violations associated with them, are typical of those produced by metal plating shops, which are often the target of EPA enforcement actions.
 
The federal hazardous waste regulations require companies to properly manage hazardous waste to prevent harm to human health and the environment. EPA discovered the following violations at TMW Corporation’s facility:
 
  • Storage of hazardous waste for over 90 days without a permit
  • Failure to conduct required inspections
  • Failure to train personnel or maintain training records
  • Failure to maintain required emergency communications equipment
  • Failure to make a hazardous waste determination
 
As a result of this enforcement action, TMW Corporation has returned to compliance with federal law and will pay a fine of $100,000. EPA's hazardous waste rules require facilities to properly store, label and close hazardous waste containers. Facilities must also have properly trained staff, as improperly stored hazardous waste can spill and pose a risk to workers and the environment.


Learn More

Zones

Supplier Categories


American Plating Power
Insoluble Anodes
Technic Inc
Luster-On Products
Pavco

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved