The EZ Pass-Thru Powder Booths feature 18-gauge prime quality galvanized steel panels, have an interior cabin of 8 x 14 feet, and are available in 5-, 6- and 7-feet wide interiors to meet customer needs. Bright full-booth illumination is provided by four Class I, Division II, 48-inches long, four-tube, 32-watt fluorescent, T-8 type light fixtures mounted behind safety glass and sealed from the interior of the spray booth. (Lexan™ roof panels may be substituted for light fixtures.) A purge control feature ensures safe operation of the coatings enclosure by maintaining airflow at design levels. A timer activates a system of air purging valves, clearing the cartridge filters of accumulated powder as needed. The Rollaway Collector Module is factory-assembled using painted 10-gauge mild steel with insulation installed for sound attenuation, and includes a spark-proof construction plug type fan, pulse valves and solenoids, and a rollaway filter module with fluidized bed. The use of rollaway filter modules allows for a quicker color change since the filter section does not have to be cleaned between color change-outs. Parts enter the EZ Pass-Thru Powder Booth through the conveyor openings, then pass the coating operator stations to receive the coating. The powder overspray is entrained within the air stream moving to the collector module, where the cartridge filters will remove the particulate. The containment air is drawn through the air handler’s primary and final filter system before being discharged back into the room. Coated parts exit the booth for conveyance to the cure oven.
Col-Met Spray Booths, Inc.
1635 Innovation Dr.
Rockwell, TX 75032
Phone (972) 772-1919 Fax (972) 772-1833
