500°F GAS-HEATED TWO-ZONE CONVEYOR OVEN

New Product Announcements From: Products Finishing,

Posted on: 3/12/2007

No. 810 is a 500°F gas-heated, two-zone belt conveyor oven, currently in use for curing aluminum pistons.

No. 810 is a 500°F gas-heated, two-zone belt conveyor oven, currently in use for curing aluminum pistons. Workspace dimensions inside this unit measure 42 in wide × 24 ft deep × 15 ft high.  The workloads travel atop a 36 in wide, 1 × 1 inch high carbon steel flat wire conveyor belt with 1/4 HP motor drive, variable from 0.8-15 inches per minute, through an 18 inch long open loading zone;  36inch long insulated heat zone with two HP, 2,000 CFM recirculated airflow;  16 inch long insulated, unheated vestibule;  16 ft long insulated heat zone with 10 HP, 12,500 CFM recirculated airflow;  12 ft long open zone;  36 inch long cooling zone and finally an 18 inch long open unloading zone.

350,000 Btu/HR are installed in modulating natural gas burners in each of the two heating zones on this conveyor oven.  An aluminized steel exterior houses four-inch insulated walls, Type 304 stainless steel interior with continuously welded seams in Zone One and aluminized steel interior in Zone Two.

 

Comments are reviewed by moderators before they appear to ensure they meet Products Finishing’s submission guidelines.
blog comments powered by Disqus


C:\inetpub\workingcopies\GCMS\Data\AdDB.cs
Learn More

Related Suppliers

Grieve Corp, The

Zones

Supplier Categories


Therma-Tron-X
Magic Rack
SIDSP

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2016

Subscribe | Advertise | Contact Us | All Rights Reserved