Jensen Fabricating Engineers Inc. (Jenfab) will present its line of aqueous cleaning systems, including stand-alone cellular, batch and continuous parts washers at PCx 2011.
Jenfab systems are optimized for both turned (SWISS) and precision screw machined parts, as well as other complex part shapes, including medical device parts, implants, CNC machined parts, fine blanked parts and stampings. The company's LeanClean 360 rotating basket, cellular aqueous cleaning systems clean, rinse and dry 1, 2, 4 and 8 baskets of parts per cycle, depending upon the LeanClean model. These environmentally green, aqueous-based systems use no harmful solvents, the company says, adding that ultrasonics are available for all LeanClean 360 systems to provide critical cleaning of complex part shapes. Various Jenfab systems can process loads from 50 to 35,000 lbs/hr.
LeanClean 360 systems are ergonomically designed to load from the front at waist height. Baskets are rotated in solution where powerful underwater spray jets remove chips and oils from parts, even with complex shapes and blind holes. Basket movement can be programmed from gentle rocking to full 360˚ rotation. Ultrasonic cleaning with advanced, tubular transducers and digital generators provides the most powerful ultrasonic action available: At over 95% output efficiency, these transducers generate more cavitation power in the tank than any other ultrasonic type can provide. Passivating, phosphating and pickling chemistries extend Jenfab’s surface modification capabilities.