Loc-Jaw System for Fourth and Fifth Axis Machining

New Product Announcements From: Modern Machine Shop

Posted on: 2/28/2013

The Loc-Jaw system for fourth and fifth axis machining is said to require no material preparation.

CLICK IMAGE TO ENLARGE (+)

The Loc-Jaw system for fourth and fifth axis machining is said to require no material preparation. The rails and gripper towers are serrated to provide a solid and adjustable base. The Loc-Jaw features 0.5" to 4.0" clamping range and is capable of penetrating 0.060" deep per gripper, producing more than 6,000 lbs of holding force. The low-profile grippers hold on 0.100" to enable full access to work surfaces, including the bottom face. A centering disk can be mounted to the bottom of the base for quick location on faceplates that are equipped with a centering hole. The base is also configured with two drill bushings for precise locating, using the included diamond and tapered pins.

 

Comments are reviewed by moderators before they appear to ensure they meet Products Finishing’s submission guidelines.
blog comments powered by Disqus



Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2015

Subscribe | Advertise | Contact Us | All Rights Reserved