Wet Deburring System Returns to Operator

Abtex Corporation’s compact, wet Tri-Ten planetary head deburring system features a return-to-operator configuration.

Related Suppliers

Abtex Corporation’s compact, wet Tri-Ten planetary head deburring system features a return-to-operator configuration. In a single pass, the system is said to deburr both sides of flat parts up to 4.5” in diameter. Drenching the workpiece with coolant as it is deburred keeps parts clean and extends brush life.

 

At one end of the system, parts are placed on a magnetic conveyor that carries them through an offset planetary deburring head where three of the company’s fiber abrasive brushes deburr the upward facing surface. The parts then move to a continuous parts-turn-over conveyor that flips them for the return trip through the brushes. After both sides of the part are deburred, it passes under a final coolant rinse, followed by an air knife to blow off excess coolant, and is demagnetized before exiting at an opening next to the entrance.