You are viewing products related to: Water

PUBLISHED: 5/23/2013

INGP Powder Neutralizes, Absorbs Flocculants

Innovative Next Generation Products’ Floc-Off powder is designed to safely and effectively remove flocculants that have been spilled or misplaced in water.

PUBLISHED: 4/17/2013

Cross-Flow Filtration Module

Porex Filtration Division will display its cross-flow Tubular Membrane Filter (TMF) module, which features 61 ½-inch-diameter tubes in a membrane that is substantially anchored in or chemically fused to a sintered porous plastic substrate tube.

PUBLISHED: 4/17/2013

Filter Presses

M.W. Watermark offers a complete line of filter presses with capacities from 0.01 to 600 cu ft, including this 630-mm air-hydraulic press on a three-sided platform with a bulk bag.

PUBLISHED: 4/17/2013

Immersible Thermoplastic Pumps

Hayward Flow Control will showcase the new T-Series of its Webster thermoplastic pumps. The line of vertical, seal-less, immersible pumps features a single, non-coupled motor/impeller shaft with a proprietary shaft seal.

PUBLISHED: 2/14/2013

Porex Filtration Tubular Membrane System Offers Cross-Flow Filtration

Porex Filtration Division’s cross-flow Tubular Membrane Module features 61 ½-inch diameter tubes in a polyvinylidene fluoride (PVDF) membrane that is anchored or chemically fused to a sintered porous plastic substrate tube.

PUBLISHED: 9/6/2012

Parkson Wastewater System's Screen Designed to Cut Clogging

Parkson Corp.’s Aqua Guard UltraClean wastewater treatment system features an upgraded screen designed to reduce downstream clogging, resulting in reduced maintenance and improved capture rates.

PUBLISHED: 5/29/2012

Atum Services Wastewater Treatment

Atum Services’ TrueBlue technology uses what it calls “sorption” to treat wastewater. The company’s pretreatment chemistry and proprietary Macro Porous Zeolite (MPZ) absorbant media remove metals and organics from wastewater.

PUBLISHED: 5/18/2012

M.W. Watermark Water Treatment Equipment

M.W. Watermark is a supplier of water and wastewater treatment equipment.

PUBLISHED: 5/17/2012

Texas Molecular Wastewater Injection Wells

Typical plating wastes, baths and rinse waters include spent acids, bases and cyanides. Texas Molecular offers cost-effective and environmentally friendly systems for managing wastewaters, including its Commercial Hazardous Class I injection wells.

PUBLISHED: 5/16/2012

Miles Chemical One-Step Wastewater Precipitant/Coagulant

Miles Chemical Co. will showcase its CoPrep TMR Plus, a one-step precipitant/coagulant for treating wastewater that is designed to enable surface finishing captive and job shops to comply with low-discharge limits on metals present in continuous flo...

RSS RSS  |  Atom Atom