You are viewing products related to: Pollution Control

PUBLISHED: 10/1/2015

Munters Corp.’s Zeolite Rotor Cassettes Absorb VOCs

These zeolite rotors are corrosion-resistant and lightweight.


PUBLISHED: 10/1/2015

Hubbard-Hall’s Paint Coating Reduces Energy Costs

This is a non-phosphate product that can significantly reduce sludge generation.


PUBLISHED: 10/1/2015

Pneu-Mech’s Custom Washers Remove Contaminates

These custom washers are designed to work with the customer’s production, finishing and footprint requirements.


PUBLISHED: 9/1/2015

Oil Concentrator Increases Skimming Efficiency

This oil water separator is non-electrical and does not contain moving parts.


PUBLISHED: 6/4/2015

Near-Zero Water Recycler Metal Finishing Essential During Drought

The Near-Zero Water Recycler is designed specifically for Tru Temp process lines up to 200 gallons in tank size.


PUBLISHED: 5/5/2015

Wastewater Treatment System Filters as Much as 97 Percent of Solution for Reuse

George Koch Sons LLC offers its Rejuvenator, a standalone wastewater treatment system that can link to new or existing processing lines to optimize cleaning chemical costs, reduce waste disposal expenditure and enhance production quality.


PUBLISHED: 4/17/2015

Brochure Describes Copolymer, Homopolymer Process Tank Technology

A new brochure from Tri-Mer Corp. describes process tank technology that uses 100-percent copolymer and homopolymer polypropylene.


PUBLISHED: 4/15/2015

Filter Reduces Hex Chromium to Trivalent Chromium without Added Chemicals

ToxSorb’s selective filtration technology effectively absorbs and removes chromium in the metal finishing applications.


PUBLISHED: 4/13/2015

Improved Cloud-based EHS Platform Enables Chemical Approval Management

MSDSonline, provider of cloud-based environmental, health and safety (EHS) management solutions, offers its enhanced chemical management platform.


PUBLISHED: 2/20/2015

Hepa, Carbon Filters Uses Coconut Shell to Absorb Organic Solvents

Hemco Corp.’s CleanAire HEPA and carbon filters are designed to be mounted inline in the exhaust ducting from a fume hood or contaminant source (as high as 1,500 cfm).


RSS RSS  |  Atom Atom