You are viewing products related to: Paint Application Systems

PUBLISHED: 3/22/2017

Titan Introduces Elite 3500 Sealed Hydraulic Airless Paint Sprayer

Titan introduces the new Elite 3500 gas-powered, sealed hydraulic paint sprayer. Titan’s first sprayer outfitted with PermaStroke Technology, the Elite 3500 has no piston, packings or clutch to replace, and is backed by a lifetime fluid pump warrant...


PUBLISHED: 3/9/2017

Graco Launches RAC X Fine-Finish, Low-Pressure Spray Tips

Graco introduces the RAC X FF LP SwitchTips, fine-finish, low-pressure spray tips featuring the company’s SmartTip technology.


PUBLISHED: 3/8/2017

Diamond-Based Coatings System Utilizes Both PVD and PECVD

Duralar Technologies introduces its Centurion deposition system designed for cost-efficient deposition of hard and decorative coatings on parts as large as one meter squared in volume production.


PUBLISHED: 3/6/2017

Siphon-Fed Atomizing Spray Nozzle Coats, Cools, Treats, Paints

Exair's ½ NPT siphon-fed atomizing spray nozzle is designed to atomize a variety of fluids in a round spray pattern where no liquid pressure is available and heavy application of liquid is needed.


PUBLISHED: 1/12/2017

Low-Pressure Airless Tip Extends Spray Life

The new HEA (High Efficiency Airless) TR1 reversible airless tip features tip technology and is said to enable spraying at lower pressures, delivering total control and extending sprayer life.


PUBLISHED: 1/10/2017

Automatic Stormer-Type Viscometer Offers Speed Control

The viscometer automatically starts and stops the motor shaft rotation by lowering or raising the instrument stand.


PUBLISHED: 12/1/2016

Coating Thickness Gage Inspects Concrete Substrates

According to Elcometer, its coatings thickness gage supports the non-destructive measurement of dry film thickness on concrete quickly and accurately.


PUBLISHED: 11/30/2016

Rotational Viscometer Measures Viscosity, Analyzes Time-Dependent Fluids

Paul N. Gardner Co. introduces its rotational viscometers that measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid.


PUBLISHED: 11/14/2016

Col-Met Offers Custom Designs for Engineered Finishing Systems

Col-Met’s Engineered Products Group includes a highly experienced team selected to distribute the partner’s design and engineer finishing system solutions.


PUBLISHED: 11/2/2016

Large-Volume Walk-In Oven Used for Curing Parts

Grieve’s No. 850 walk-in oven features 4" insulated walls, aluminized steel interior and exterior, plus a 2" insulated floor with integral truck wheel guide tracks for easier loading and unloading.


RSS RSS  |  Atom Atom