You are viewing products related to: Coatings

PUBLISHED: 3/21/2017

Handheld Thickness Gages Measure Coating Thickness on Variety of Substrates

Gardco introduces the new CMI155 and CMI157 thickness gages that measure the thickness of single layer coatings or the total thickness of applied coatings on iron, steel, aluminum and other metal substrates.


PUBLISHED: 3/8/2017

Diamond-Based Coatings System Utilizes Both PVD and PECVD

Duralar Technologies introduces its Centurion deposition system designed for cost-efficient deposition of hard and decorative coatings on parts as large as one meter squared in volume production.


PUBLISHED: 1/12/2017

Low-Pressure Airless Tip Extends Spray Life

The new HEA (High Efficiency Airless) TR1 reversible airless tip features tip technology and is said to enable spraying at lower pressures, delivering total control and extending sprayer life.


PUBLISHED: 1/10/2017

Automatic Stormer-Type Viscometer Offers Speed Control

The viscometer automatically starts and stops the motor shaft rotation by lowering or raising the instrument stand.


PUBLISHED: 12/1/2016

Coating Thickness Gage Inspects Concrete Substrates

According to Elcometer, its coatings thickness gage supports the non-destructive measurement of dry film thickness on concrete quickly and accurately.


PUBLISHED: 11/30/2016

Rotational Viscometer Measures Viscosity, Analyzes Time-Dependent Fluids

Paul N. Gardner Co. introduces its rotational viscometers that measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid.


PUBLISHED: 11/7/2016

Valmont Coatings Showcases Variety of Finishes

Valmont Coatings is a full-service coating company specializing in hot-dip galvanizing, powder coating, anodizing, liquid coating and ecoat finishes.


PUBLISHED: 11/2/2016

Large-Volume Walk-In Oven Used for Curing Parts

Grieve’s No. 850 walk-in oven features 4" insulated walls, aluminized steel interior and exterior, plus a 2" insulated floor with integral truck wheel guide tracks for easier loading and unloading.


PUBLISHED: 11/1/2016

Sherwin-Williams Introduces Polane D 8700 Direct-to-Metal

Sherwin-Williams, through its Product Finishes Division, introduces Polane D 8700.


PUBLISHED: 11/1/2016

Direct-To-Metal Coating Matches Primer-Topcoat System Performance

Spectracron SPM coating is engineered for direct application to pretreated metal substrates while providing corrosion resistance comparable to traditional two-component primer-topcoat systems.


RSS RSS  |  Atom Atom