TTX designs, fabricates and installs custom paint finishing systems for industrial clients.
The Therma-Tron-X SlideRail Square Transfer (SST) material handling system is set up to perform high-volume finishing operations using a fraction of the space required by traditional monorail systems.
Designed to prepare parts for painting, plating or other industrial finishing processes, Therma-Tron-X’s multi-stage pretreatment systems use spray, immersion or combination methods to remove dirt, oils and contaminants from part surfaces, and then apply phosphate or conversion coatings to help prevent corrosion and increase paint adhesion.
Therma-Tron-X has launched a new website (therma-tron-x.com or ttxinc.com) designed to offer easy access to information on the company’s TTX finishing systems, environmental systems and coating technologies and on Therma-Tron-X itself.
See the video which airs May 30 between 9:30-9:40pm EST on Fox Business Network.
Altec Industries in Burnsville, N.C., a manufacturer of heavy truck bodies and related equipment, added e-coat to its finishing operation and—through the proper design and execution of an electrocoat/liquid spray topcoat paint system —addressed issues of e-coating large truck bodies.
Therma-Tron-X’s customized stainless steel washers are designed to handle corrosive pretreatment solutions and feature slotted roofs to protect conveyor components from moisture and process chemical sprays.
The Therma-Tron-X Inc. Econ-E-Coat is an energy efficient, portable coating system.
Oshkosh Corporation in Wisconsin was approved by the U.S. Army earlier this year to build about 23,000 military trucks and trailers under the five-year contract starting in 2011.
Any mechanic will tell you that, to do a repair correctly, you need to have the right tool for the job.
The company manufactures complete, custom-designed electrocoating, powder and liquid coating systems and their components.
Therma-Tron-X (TTX) is a manufacturer of custom designed electrocoating, powder and liquid coating systems including counterflow spray/immersion phosphating pretreatment and high-efficiency dryoff and cure ovens.
Adding E-Coat E-quals E-xpanded Opportunities for Job Shops and OEMs...
High-capacity chemical stripping equipment for cleaning of process racks or removal of paint and oxidation from parts.
The company is a manufacturer of complete powder coating systems including custom-designed counterflowing zinc/iron phosphating spray washers, high efficiency dryoff and cure ovens and climate controlled environmental room fully integrated with customer choice of application equipment.
When it wanted to expand its profits and customer base, Detroit-based Burkard Industries added Class A electrocoating to its repertoire of services...
Iowa Mold Tooling Co., Inc. develops service vehicles and material handling systems for a variety of industries. Recently, IMT made some changes to its paint booth filtration system that resulted in a cost savings of 68%. Here's how the company pulled it off...
Please visit: Therma-Tron-X, Inc.
1155 S Neenah Ave.
Sturgeon Bay, WI 54235 US
|The TTX facility has 150,400 sqr. ft. with an additional 22,600 sqr. ft. of modern office space.|
Your Full Service Finishing System Supplier
Your Full Service Finishing System Supplier
Therma-Tron-X, Inc. (TTX) is an original manufacturer of complete electrocoat, powder coating and liquid coating and autodeposition systems and their components. Our sister company, TTX Environmental, produces water conditioning equipment, wastewater treatment systems, acid recovery units and water recycling systems. Our combined facility encompasses over 170,000 square feet with engineering and fabrication capabilities concentrated under one roof to efficiently serve our customers.
Our revolutionary SlideRail Square Transfer™ (SST) material handling concept allows for high capacity immersion pretreatment and electrocoating operations in much less floor space than monorail systems. TTX has been a pioneer in automatic voltage control, low maintenance conveyor grounding mechanisms and process tank designs that ensure proper circulation without foaming and settling.
Cutting edge technology and modern facilities allow TTX to fabricate 90 percent of the equipment needed for a system in house. Both design and manufacturing facilities are located on-site to ensure seamless communication through all project phases. In addition, TTX Air, LLC, a subsidiary of TTX holdings, has multiple aircraft, spacious offices, and a hanger nearby, making it easy for employees and clients to travel to and from our northeastern Wisconsin location.
Therma-Tron-X provides complete systems support: evaluation, testing, design, engineering, fabrication, installation, training and field service. Our years of experience enable us to meet the equipment needs of our customers and to maximize the productivity of their finishing operations.
In the years since Therma-Tron-X has started, hundreds of systems of every type have been produced. Many manufactures seeking to process their products through state of the art facilities have come to TTX for complete systems We know that every customer is the most important customer. Your best finish starts with us!