Viking Blast & Wash Systems

731 S. Industrial CT
Rose Hill, KS 67133 US

Connect

As Seen In Products Finishing

Viking Blast and Wash Systems Presents Newest Industrial Washer
The unit is designed specifically for hard to clean aftermarket applications but can easily be configured to standard manufacturing applications.

Viking Monorail Shot Blaster Reduces Operator Costs
This unit enables the user to modify blast zones to accommodate a range of parts.

Parts Washer Gets Redesign
This specific unit is equipped with an industrial, natural gas burner with electronic ignition.

Viking Blast & Wash Blaster Features 2 High-Power Blast Wheels
The SH 4848 Spinner Hanger blaster from Viking Blast & Wash Systems is equipped with two VK Powermax 15-hp, 3,525-rpm blast wheels and aggressive air intake that enables application of more than 2,400 cfm, yielding cleaner abrasive and a cleaner cabinet, the company says.

Extra Large Capacity Washer
Viking Blast and Wash System’s RW 120-72C, extra large capacity washer offers a work envelope of 72 inches in height with a 120-inch diameter worktable that can support up to 15,000 lbs.

Airless Shot Blaster
Viking Blast & Wash Systems’ improved SR-6 Airless Shot Blaster is designed to remove rust or enamel from a wide variety of materials, from fractional diameter up to 6-inch diameter pipe to an SSPC-6 surface finish on a continuous flow basis.

Blast Cleaning Equipment
This brochure featurs blast cleaning equipment for companies who powder coat or perform other painting and finishing operations.

High-Pressure Washer
The GC72 is a high pressure, pass-through washer that incorporates a powered, galvanized chain-belt conveyor, with variablespeeds ranging between 3-18 feet per minute.

Blast and Wash Systems
Viking Blast & Wash Systems announced the release of its new and improved Spinner Hanger, the SH 2560.

Wheel and Rim Blaster
The WH2600 is designed to remove paint and rust from wheels and rims for improved paint adhesion and to facilitate visual inspections for defects that may jeopardize wheel safety.

Blast and Wash System
The CB 1818 uses 4, 6 or 8, model VC-1 direct drive blast wheels for complete 360-deg part coverage.

Product Categories of Viking Blast & Wash Systems

Abrasive Blasting Equipment, dry
Abrasive Blasting Equipment, glass bead
Abrasive Blasting Equipment, wet, vapor
Abrasive Blasting Materials
Cleaning and Phosphating Equipment
Cleaning Systems, aqueous or CFC-free
Deburring Equipment
Degreasers, solvent, vapor
Dust Collectors, Dust-Control Systems
Parts Washers, mechanically agitated
Shot-Peening Equipment and Supplies
Used Equipment
Vibratory Finishing Equipment
Washers, small parts