« Prev | | Next »

Sort by:


Guyson Corp.’s Robotic Blast System Preps Grit Blast Surface
The finishing chamber of the robotic blasting system is designed with a reinforced vestibule at the rear to house an ABB Robotics IRB-2600 robot.
New Product Announcements Published: 1/26/2016
United Surface Solutions' Deburring Machine Uses G-Force
This machine is designed for manufacturers serving the aerospace, medical, automotive and jewelry industries.
New Product Announcements Published: 12/24/2015
sia Abrasives Inc.’s Ceramic-Based Fiber Disc Series Used on Unalloyed and Low-Alloyed Steel
4561 siabite uses a ceramic-based blend of grains to deliver fast results without compromising on quality for low-alloyed steel.
New Product Announcements Published: 10/1/2015
Blast Cleaning Technologies’ Plate Blast System Designed for Descaling of Plate and Structural Shapes
This system is designed for descaling application of plate and structural shapes.
New Product Announcements Published: 10/1/2015
Blastman’s Blasting Robots Efficiently Remove Tough Coatings
These robots are always tailored according to the blast chamber and work pieces.
New Product Announcements Published: 10/1/2015
Transmet Corp.’s ZA4 Zinc Alloy Shop Removes Flash from Light Metal Castings
The durability of the shot is said to result in two-thirds less dust from blasting operations.
New Product Announcements Published: 10/1/2015
Robotic Grit-Blast System’s Twin Tables Keep Downtime to a Minimum
The RB-72 TT was designed for production descaling and surface preparation.
New Product Announcements Published: 6/8/2015
Robotic Grit Blaster Requires Minimal Human Contact
Guyson Corp.’s RB-10-TC robotic grit blasting machine is adapted for processing aircraft turbine blades in production lots and designed for lightly attended operation, blasting an entire pallet-load of components without human intervention.
New Product Announcements Published: 4/9/2015
Guyson Robotic Grit-Blast Machine Processes Multiple Components
Guyson Corporation’s RB-RXS-400 robotic grit-blasting machine offers a 180-degree indexing table and servomotor-driven spindles holding multi-component fixtures for production surface preparation applications.
New Product Announcements Published: 5/22/2014
Guyson Slurry-Blast System Offers 2-Axis Gun Motion
Designed for wet-blast cleaning, descaling and pre-polish treatment of dies or molds, Guyson’s Vaqua slurry blasting system features a gun manipulator that moves the blast nozzles vertically and horizontally in a repeatable, programmed routine.
New Product Announcements Published: 5/2/2014

« Prev | | Next »


Schaffner Mfg. Co., Inc.

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2016

Subscribe | Advertise | Contact Us | All Rights Reserved