Page 1 of 2
Page 2 of 2
Date: Newest First
Date: Oldest First
Title: A to Z
Title: Z to A
Advanced Technical Finishing Receives Nadcap Accreditation
Receives accreditation for MIL-A-8625 Anodic Coatings for Aluminum and Aluminum Alloys, and MIL-DT-5541 Chemical Conversion Coatings on Aluminum and Aluminum Alloys.
Blog Published: 3/24/2014
Aluminum Anodizers Council Needs Papers For 2014 Conference
AAC 2014 Fall Conference is Sept. 16-18 in Pittsburgh, Pa. The deadline for submitting a paper for consideration is January 27.
Blog Published: 12/24/2013
Waterborne Symposium 2014 Announces Program
The event kicks off with the Short Courses from February 24 – 25, followed by the Technology Showcase Exhibit Hall from February 25 – 27.
Blog Published: 11/29/2013
AAC Announce its Level 1 Workshop for 2014
This day long program is packed with anodizing information for those new to the industry, or those who want a refresher course on the basics.
Blog Published: 11/27/2013
Dr. Arthur Brace Receives AAC Lifetime Contribution Award
Author of "The Technology of Anodizing Aluminium" is considered the standard of the industry. His presentation, "60 Years in the Development of a New Model of Anodic Coating Formulation" provided his personal historic overview of the aluminum anodi...
Blog Published: 10/11/2013
Linetec Expands Anodizing Facility, Increases Capacity, Grows Staff
Wisconsin company is building a 30,000-sq-ft addition to their anodize facility in Wausau and increasing the anodize staff by more than 10 percent.
Blog Published: 9/25/2013
Advanced Technical Finishing Continues $10 Million Renovation
Plans include upgrading current anodizing line equipment to allow for increased capacity on Type I, II and III anodizing, new electroless nickel lines and a titanium Type II & III finishing line.
Blog Published: 5/24/2013
AAC Holding Anodizing Essentials Workshop In Italy
Anodizing Essentials Workshop (Level 1) on May 17 in conjunction with the 8th Aluminum Two Thousand International Congress in Milano, Italy
Blog Published: 3/19/2013
New USGA Stimpmeter Shines in Anodized Blue
Day Tool & Mfg. in Whitehouse, NJ and B&M Finishers in Kenilworth, NJ work to get the blue anodized look just right.
Blog Published: 2/19/2013
Reliant Aluminum Products Promotes Industry Use of Aluminum
Company produces several videos that promote the use of aluminum in the manufacturing process, as well as an advocacy video for several aluminum trade groups.
Blog Published: 1/16/2013
Page 1 of 2
Page 2 of 2