Process

Exploring the: Process Zone

44 Results for: New Product

Sort by:
Published: 8/27/2015

Voraforce Technology Offers Sustainability Benefits
Voraforce is an alternative to traditional materials like aluminum, polyester or epoxy.

Published: 7/29/2015

Non PFOS Mist Suppressants from Electrochemical Products Inc.
E-Mist 7 and E-Mist 9 are designed to remain stable when added to strong oxidizing solutions.

Published: 4/13/2015

Remote Unit Enables Type II, III Anodizing Regardless of Alloy
The PAS II~III PLC from Anodize USA is designed to perform both type II and type III anodizing regardless of alloy.

Published: 7/3/2014

No-Growth Anodizing?
Florida finisher says it has the key to limited-growth aluminum anodizing.

Published: 6/9/2014

Backflushing Filter Systems Handle Aggressive Chemicals
Global Filtration Systems – Sur/Fin 2014, Booth 619

Published: 6/6/2014

ASF Anodizing Instruments Enable Process Control
Anodize USA – Sur/Fin 2014, Booth 146

Published: 5/30/2014

Caparo G-Clamps Grip Parts During Metal Finishing
Developed primarily for use in metal finishing, Caparo Clamps’ G-clamps are designed to reliably grip aluminum extrusions and other parts during processing, while withstanding the corrosive attack of process chemicals.

Published: 9/23/2013

EPi Yellow-Red Passivate Offers High Corrosion Resistance
EPi’s E-PASSivate Yellow-Red is a single-dip yellow passivation for zinc-plated substrates formulated to offer salt spray resistance of as many as 200-250 hrs to white rust without an additional top coat.

Published: 2/21/2013

StockCap Guide Offers Masking Material Comparisons
StockCap’s Material Selection Guide highlights masking material options for different finishing processes, providing tolerances to heat and chemical conditions, masking temperature ranges and material cost comparisons to help finishers choose the ri...

Published: 2/20/2013

Polymer Molding Silicone Masks Protect in High Temperatures
Polymer Molding’s masking products include high-heat-resistant silicone rubber caps and plugs, pull plugs and other silicone products used for powder coating, e-coating, anodizing and plating.