Anodizing Research

Exploring the: Anodizing Research Zone

8 Results for: Article

Sort by:
Published: 3/16/2017

Crack Formation during Electrodeposition and Post-deposition Aging of Thin Film Coatings - 4th Quarterly Report
Fourth Quarterly Report - AESF Research Project #R-118. This NASF-AESF Foundation research project report covers the fourth quarter of project work (October-December 2016).

Published: 3/16/2017

Electrodeposition of Ni-Fe-Mo-W Alloys - 16th Quarterly Report
16th Quarterly Report - AESF Research Project #R-117. This NASF-AESF Foundation research project report covers the 16th and final quarter of this project work (October-December 2016).

Published: 1/12/2017

The Plater and Pollution - The 18th William Blum Lecture
This article is a re-publication of the 18th William Blum Lecture, by Dr. Joseph B. Kushner, presented at the 64th AES Annual Convention in Los Angeles, California, on June 27, 1977.

Published: 8/1/2014

Hex Chromium-Free Sealants for Defense and Aerospace
Results of second phase of research conducted by top defense contractors.

Published: 6/1/2012

Painting Proportioners Becoming Popular With Finishers
Offer high ratio accuracy, various flow rates

Published: 7/13/2011

Improvement of Corrosion Resistance of Magnesium by Anodizing in Alkaline Electrolytes
Results show that the novel organic additive reduced the sparking voltage and provided a relatively smoother surface.

Published: 1/31/2011

An Overview of Hard Chromium Plating Using Trivalent Chromium Solutions
For more than forty years, academic and industrial researchers from all over the world have taken a strong interest in alternative processes for hard chromium plating using hexavalent ions. The benefits of substitute processes are obvious, as the t...

Published: 4/1/2010

Passivation Basics
What is commonly referred to as "passivating" on a shop floor is actually just enhancement of a naturally occurring process on most stainless steels.