Anodizing

Exploring the: Anodizing Zone

297 Results for: Blog

Sort by:
Published: 8/18/2017

Automated Selective Plating Takes Off With Safran Project
Sifco ASC has partnered with Safran on various surface finishing projects for more than 20 years, including recent work to increase wear resistance on an aircraft’s axles.

Published: 8/8/2017

DS Manufacturing Changes Name to Lincoln Industries
This name change marks a continued strengthening of Lincoln Industries' position as the nation’s leading supplier of exhaust tubes in the United States, the company says.

Published: 8/4/2017

New Legislation Will Impose Higher Penalties on California Platers
The current maximum penalty of $7,000 for general violations is increasing to $12,471. This new penalty level also will apply for CAL/OSHA posting, record keeping and notice requirement violations.

Published: 8/2/2017

NASF's Midwest Sustainability Summit to Focus on Technology
The Chicago Midwest Chapter of the National Association for Surface Finishing is partnering with chapters in Rockford and Milwaukee to host the Midwest Sustainability Summit on October 12-13, at the Grand Geneva Resort and Spa in Lake Geneva, Wiscon...

Published: 7/27/2017

Milwaukee's EFCO Finishing Moving to Larger Facility
After 50 years at its current home, Milwaukee's EFCO Finishing will relocate to a newer, larger building in Menomonee Falls, Wisconsin, later this summer. Owners say they plan to be up and running at the new location by September 1.

Published: 7/13/2017

California Plating Chapters Host Supplier Showcase
The MFASC Conference will be in Montebello on Sept. 26, and the MFANC Conference will be in San Jose Sept. 28.

Published: 7/11/2017

Michigan NASF Midwest Seminar Features Navy SEAL Rob O'Neill, and Full Conference
One of the country’s most highly decorated Navy SEAL combat veterans, Rob O’Neill, was involved in our nation’s most strategic military campaigns and led the military’s most elite.

Published: 7/1/2017

Study Reveals Finishing Industry Barriers to Phasing Out Cadmium
Sifco conducted the survey, which they say was done to gage the industry knowledge of about speculation that the U.S. aerospace industry will phase out cadmium by 2023.

Published: 6/23/2017

Surface Technology Plates Second Cycle of Brompton Bikes
The Nickel Edition, the most advanced finish used by Brompton to date, is electroless nickel plated by Surface Technology at its Leeds facility in England.

Published: 6/19/2017

Aluminum Anodizing Operation Receives GM Approval
Chicago's Arlington Plating Company's fully automated aluminum anodizing operation has been approved to meet the GMW14665 material specification, anodic oxidation Coating on Aluminum.