« Prev | | Next »

Sort by:


Anodizing that Withstands H2O2 Cleaning
Testing color anodized finishes in hydrogen peroxide gas plasma sterilization.
Article Published: 12/1/2013
Is Aerospace Finishing Filled to Capacity?
As Boeing and Airbus demand more finishing capacity, the challenges faced by owners of finishing businesses are pressing, as both customers and regulatory agencies amp up demands for management attention and resources.
Article Published: 11/1/2013
New Anodizing Technology for Reusable Medical Equipment
Decorative properties of Type II, functional properties of Type III.
Article Published: 4/1/2013
Anodizing for Bonding Applications in Aerospace
Anodizing for pre-prep bonding bridges the gap between the metallic and composite worlds, as it provides a superior surface in many applications on aluminum components for bonding to these composites.
Article Published: 12/1/2011
Flying High with BSAA: Environmentally friendly alternative to chromic acid anodize
BSAA oxide coating exhibits many of the same properties as the aluminum oxide coating that is derived from the chromic acid process.
Article Published: 10/1/2011
Improvement of Corrosion Resistance of Magnesium by Anodizing in Alkaline Electrolytes
Results show that the novel organic additive reduced the sparking voltage and provided a relatively smoother surface.
Article Published: 7/13/2011
Pre-Colored Stainless Steel Improves Product Design, Productivity
Sandvik Materials Technology has rolled out a pre-coated metal strip steel intended to boost productivity and reduce environmental constraints associated with plating and coating in multiple industries.
Article Published: 3/1/2011
Cr(III) Conversion Layers on Zinc and Zinc Alloys: Evolution and Perspectives
Trivalent chromium conversion layers have successfully replaced hexavalent conversion chromium on zinc and zinc alloys for many applications, especially in the automotive industry since the entry in force of the ELV directive. Different technologie...
Article Published: 3/1/2011
Non-PFOS, Permanent Mist Suppressants for Hard Chromium Plating, Decorative Chromium Plating and Chromic Etch Applications
Mist suppressants are an important tool for reducing exposure of workers to Cr(VI) during plating and etching operations. A common raw material used for efficient mist suppressants was, and still is, PFOS. PFOS is subject to legislation across th...
Article Published: 3/1/2011
Aluminum Anodizing
Types of anodizing, processes, equipment selection and tank construction.
Article Published: 2/18/2011

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved