Chromium Plating

Exploring the: Chromium Plating Zone

53 Results for: News

Sort by:
Published: 6/27/2016

Technic Enters Mexico Distribution Agreement with Galber S.A. de C.V.
Mexico’s leading surface finishing distributor to offer Technic products.

Published: 6/27/2016

Jack Horner, a well-known expert in finishing industry, passes away
As technical director of Allied Kelite, Horner wrote training modules and authored the technical service modules on copper plating, zinc plating and bright nickel plating.

Published: 6/13/2016

Gold Plating Services Installs Technic ENEPIG Process
With the addition of the electroless palladium to the existing TechniPad ENIG process, GPS says it is capable of providing a service exceeding both IPC 4552 for ENIG and IPC 4556 for ENEPIG.

Published: 11/1/2015

TOP SHOPS: Professional Plating
Established in 1979 by Bob and Pat Endries, founders of Endries International, who were looking for a dependable source of plating for the fasteners supplied to their customers.

Published: 10/16/2015

SRG Global Celebrates Expansion of Its Irapuato, Mexico Plant
The expansion added 20,000-square-meters to the existing 21,000-square-meter facility and houses a chrome plating line.

Published: 8/25/2015

Hatched in Europe, REACH Regulations Impact U.S. Auto Manufacturers
U.S. auto makers are not obligated to comply with REACH, but a gradual or phased-in global solution is a practical approach.

Published: 8/4/2015

Enthone's Trilyte Flash CL Approved by General Motors
The process significantly reduces the potential for high current density burning and “white wash” effects.

Published: 6/4/2015

Enthone Publishes Hard Chrome Customer Case Study
A study detailing how a leading European metal finishing company expanded production capacity by 35 percent.

Published: 6/1/2014

Metal Finisher Reaches Agreement with Air Board
Hixson Metal Finishing and SCAQMD reached an agreement over air emissions at the Newport Beach, California, finishing plant.

Published: 3/17/2014

Sam Huffman passes; Was Founder of CAPSCO, Carolina Plating and Stamping Co.
Formerly Carolina Plating and Stamping Co., Huffman was a longtime member of AESF, NAMF and NASF.