Exploring the: Pretreatment for Plating Zone

« Prev | Page 1 of 33 Page 2 of 33 Page 3 of 33 Page 4 of 33 Page 5 of 33 Page 6 of 33 Page 7 of 33 Page 8 of 33 Page 9 of 33 Page 10 of 33 Page 11 of 33 Page 12 of 33 Page 13 of 33 Page 14 of 33 Page 15 of 33 Page 16 of 33 Page 17 of 33 Page 18 of 33 Page 19 of 33 Page 20 of 33 Page 21 of 33 Page 22 of 33 Page 23 of 33 Page 24 of 33 Page 25 of 33 Page 26 of 33 Page 27 of 33 Page 28 of 33 Page 29 of 33 Page 30 of 33 Page 31 of 33 Page 32 of 33 Page 33 of 33 | Next »

Sort by: Date: Newest First Date: Oldest First Title: A to Z Title: Z to A

“Lumpy” Stannate Tin

I am having problems plating stannate tin on parts that have a copper flash. Parts are “lumpy” and dewetted.
Ask an Expert Published: 5/16/2013

Plating Copper Bus Bars

Why are the copper bus bars in our plating facility nickel-plated?
Ask an Expert Published: 5/14/2013

Flaking Nickel

Our stripping process sometimes does not remove all of the nickel plate. When re-plated, the areas that still have “old” nickel on the surface tend to flake. Do you have any suggestions for solving this problem?
Ask an Expert Published: 5/10/2013

Plating Stainless Steel

We plate carbon steel with brass, and our process consists of hydrochloric acid pickling, rinse, cyanide brass plating, or copper and zinc followed by diffusion. Would it be possible to plate stainless steel with the same process?
Ask an Expert Published: 5/9/2013

Recycling Metals

Is there a process or commercial equipment to electrodeposit Zn, Ni, Cr, Fe, and remove the heavy metals from the wastewater?
Ask an Expert Published: 5/7/2013

Stripping Copper-Nickel-Chrome

Is there a method for stripping copper-nickel-chrome deposits from rejected zinc diecastings?
Ask an Expert Published: 5/2/2013

Stripping Tin from Copper

I recently received some old tin-plated copper to be replated. What methods can remove the old tin layer without harming the copper?
Ask an Expert Published: 4/24/2013

Controlled Addition of Additives

Who manufactures or distributes devices for the automatic, controlled addition of plating solution additives such as anti-pitting agents?
Ask an Expert Published: 4/2/2013

Black Finish on 430 Stainless Steel

Do you know of a way to get a black surface finish on 430 stainless steel screws that will stand up to the road blast under a car?
Ask an Expert Published: 4/1/2013

“Grades” of Black Oxides?

Are there different grades of black oxide? If so, are some tougher than others?
Ask an Expert Published: 3/29/2013

« Prev | Page 1 of 33 Page 2 of 33 Page 3 of 33 Page 4 of 33 Page 5 of 33 Page 6 of 33 Page 7 of 33 Page 8 of 33 Page 9 of 33 Page 10 of 33 Page 11 of 33 Page 12 of 33 Page 13 of 33 Page 14 of 33 Page 15 of 33 Page 16 of 33 Page 17 of 33 Page 18 of 33 Page 19 of 33 Page 20 of 33 Page 21 of 33 Page 22 of 33 Page 23 of 33 Page 24 of 33 Page 25 of 33 Page 26 of 33 Page 27 of 33 Page 28 of 33 Page 29 of 33 Page 30 of 33 Page 31 of 33 Page 32 of 33 Page 33 of 33 | Next »