xxx


« Prev | | Next »

Sort by:


Technic enters agreement with Otomec for wire, strip, coil, bar, and tube equipment
Agreement further expands Technic’s reel-to-reel and roll-to-roll global market presence with expanded resources and technologies for the continuous processing industrial finishing industry in the U.S.
News Published: 7/7/2016
Plateco Earns Columbia Chemical's CAR Certification
Electroplater in Reedsburg, Wisconsin, recently earned certification as a Columbia Approved Resource applicator; this certification was attained through a stringent quality control audit, conducted in collaboration with Columbia Chemical.
News Published: 7/7/2016
Alpha Metal Finishing Names Jennifer Marks as Office Manager
Marks comes with a wealth of experience in business management and customer service, and has served successfully as quality inspector for the past eight months at Alpha Metal Finishing.
News Published: 6/27/2016
Technic Enters Mexico Distribution Agreement with Galber S.A. de C.V.
Mexico’s leading surface finishing distributor to offer Technic products.
News Published: 6/27/2016
Jack Horner, a well-known expert in finishing industry, passes away
As technical director of Allied Kelite, Horner wrote training modules and authored the technical service modules on copper plating, zinc plating and bright nickel plating.
News Published: 6/27/2016
California Regulators Approve Hunter Fume Suppressant
Formulations HCA-8.1 and HCA-8.2 are in widespread use across the U.S., as the industry has transitioned away from PFOS-based compounds over the past couple of years.
News Published: 6/22/2016
Multi-Flex Plating Co. Receives Nadcap Merit Status
The company first obtained Nadcap accreditation in 2005.
News Published: 6/21/2016
Uyemura Appoints Technical Service Engineer for Western States
Rund’s skill set includes product development, business development and new facility start-up.
News Published: 6/20/2016
Gold Plating Services Installs Technic ENEPIG Process
With the addition of the electroless palladium to the existing TechniPad ENIG process, GPS says it is capable of providing a service exceeding both IPC 4552 for ENIG and IPC 4556 for ENEPIG.
News Published: 6/13/2016
American Plating Power Opens Office in Mexico
The new office will enable the company to expand operational capabilities in Latin America.
News Published: 6/10/2016

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2016

Subscribe | Advertise | Contact Us | All Rights Reserved