[ Log On ]
Exploring the: Electrocoatings Zone
|
Sort by: |
- A Protective Decorative Electrolytic Coloring Process for Aluminum
- The main task of this work was to study the influence of the different parameters on the electrolytic coloring process for aluminum.
Article Published: 5/18/2011
- 2020 Vision: High-Performance Coatings
- Currently, the NAFTA and European regions are considered to be more mature markets for traditional coatings applications, while the growing Asia region is expected to continue to expand.
Article Published: 5/18/2011
- Touching Up: Selective Brush Plating in the Field
- Selective brush plating is much more than just a touch-up repair process. Hundreds of applications are using the selective brush plating process to provide surface enhancement coatings to aircraft OEM applications.
Article Published: 5/1/2011
- Rent an E-Coat System? Now You Can
- Imagine turning space usually set aside for storing parts needing to be shipped out for e-coating into an actual e-coat assembly, one that a plant could lease for a specific job and then turn it back in when the job is finished.
Article Published: 4/1/2011
- Power Up to Cut Down on Energy
- Electrocoat rack stripping is a substantial cost to coaters, so it is imperative to use practices that reduce high energy requirements and identify techniques to minimize these costs that contribute to the electrical contact defects.
Article Published: 3/1/2011
- Electrocoating
- Electrocoating is a process by which electrically charged particles are deposited out of a water suspension to coat a conductive part. During the electrocoat process, paint is applied to a part at a certain film thickness, which is regulated by the ...
Article Published: 2/21/2011
- Good As Gold: Epner Technologies' 'Laser Gold'
- David Epner's Laser Gold application -- with 99.4% reflectivity and a hardness of 200 on the Knoop scale -- has saved countless projects and several careers for clients who couldn’t get it done otherwise. And it has kept Epner smiling as he relishes...
Article Published: 2/1/2011
- Taking the Guesswork Out of E-coat
- Fast, accurate simulation of E-coat paint processes.
Article Published: 8/1/2009
- Expanding on E-Coat
- Electrocoat products and processes continue to evolve, with development focused on lower energy use, very low VOC content and methods to reduce cost per applied square foot. The following is a primer on how a combination of new materials and good pr...
Article Published: 9/1/2007
- An End User Perspective
- A look at new electrocoating technology from a user's perspective...
Article Published: 4/1/1996