Electrocoatings

Exploring the: Electrocoatings Zone

33 Results for: Article

Sort by:
Published: 8/1/2011

Wheel Exchange Program Taking Off for Coaters
Jaguar, BMW, Mercedes in the program.

Published: 8/1/2011

Diversity in the Realm of the Giants
BASF and Volvo celebrate 30-year cathodic e-coat partnership in Sweden.

Published: 5/18/2011

A Protective Decorative Electrolytic Coloring Process for Aluminum
The main task of this work was to study the influence of the different parameters on the electrolytic coloring process for aluminum.

Published: 5/18/2011

2020 Vision: High-Performance Coatings
Currently, the NAFTA and European regions are considered to be more mature markets for traditional coatings applications, while the growing Asia region is expected to continue to expand.

Published: 5/1/2011

Touching Up: Selective Brush Plating in the Field
Selective brush plating is much more than just a touch-up repair process. Hundreds of applications are using the selective brush plating process to provide surface enhancement coatings to aircraft OEM applications.

Published: 4/1/2011

Rent an E-Coat System? Now You Can
Imagine turning space usually set aside for storing parts needing to be shipped out for e-coating into an actual e-coat assembly, one that a plant could lease for a specific job and then turn it back in when the job is finished.

Published: 3/1/2011

Power Up to Cut Down on Energy
 Electrocoat rack stripping is a substantial cost to coaters, so it is imperative to use practices that reduce high energy requirements and identify techniques to minimize these costs that contribute to the electrical contact defects.

Published: 2/1/2011

Good As Gold: Epner Technologies' 'Laser Gold'
David Epner's Laser Gold application -- with 99.4% reflectivity and a hardness of 200 on the Knoop scale -- has saved countless projects and several careers for clients who couldn’t get it done otherwise. And it has kept Epner smiling as he relishes...

Published: 8/1/2009

Taking the Guesswork Out of E-coat
Fast, accurate simulation of E-coat paint processes.

Published: 9/1/2007

Expanding on E-Coat
Electrocoat products and processes continue to evolve, with development focused on lower energy use, very low VOC content and methods to reduce cost per applied square foot. The following is a primer on how a combination of new materials and good pr...