E-coat Processes

Exploring the: E-coat Processes Zone

34 Results for: Article

Sort by:
Published: 5/18/2011

2020 Vision: Ecoating (2)
At BASF, we believe the industry will focus on new technologies, new innovations, and products and processes that enable the customer to be more efficient and ultimately more successful.By more efficient we mean ‘no coats’ and ‘par...

Published: 4/1/2011

Rent an E-Coat System? Now You Can
Imagine turning space usually set aside for storing parts needing to be shipped out for e-coating into an actual e-coat assembly, one that a plant could lease for a specific job and then turn it back in when the job is finished.

Published: 3/1/2011

Power Up to Cut Down on Energy
 Electrocoat rack stripping is a substantial cost to coaters, so it is imperative to use practices that reduce high energy requirements and identify techniques to minimize these costs that contribute to the electrical contact defects.

Published: 2/1/2011

Good As Gold: Epner Technologies' 'Laser Gold'
David Epner's Laser Gold application -- with 99.4% reflectivity and a hardness of 200 on the Knoop scale -- has saved countless projects and several careers for clients who couldn’t get it done otherwise. And it has kept Epner smiling as he relishes...

Published: 12/1/2002

Loss Of Permeate Flux Rate
Question: We are experiencing loss of permeate flux rate.

Published: 6/1/2002

Electrocoating Tubular Heat Exchangers
Question: We have experienced some corrosion on tubular heat exchangers used for swimming pools.

Published: 6/1/2002

Electrocoat Dimensional Tolerances
Question: My company makes high-tech precision machinery.

Published: 6/1/2002

Tools for Electrocoating
Question: We are starting a custom electrocoat operation and are wondering what should be considered in the design of tooling.

Published: 3/1/2002

Electrocoating Stainless Steel Parts
Question: We have a customer who wants to electrocoat stainless steel parts (grade 430 or 436). Can we expect adhesion problems with normal pre-clean treatments?

Published: 1/1/2002

Electrocoating Stainless Steel
Question: We have a customer who wants to electrocoat stainless steel parts (grade 430 or 436). We have a complete pretreatment system for use prior to electrocoat.