« Prev | | Next »

Sort by:

Co-Cure to the Rescue For A-Coat and Powder Coating
Henkel’s autodeposition protection technology is an alternative vehicle coating, as Android hopes to produce 9,000 vehicles this year for Florida-based Vehicle Production Group.
Article Published: 7/1/2012
Cyklos Building a Better Finishing Machine
Tornos rolls out its turnkey surface finishing machine, Cyklos, a self-contained apparatus that enables machining shops to integrate wet electrochemical or chemical surface processing into their manufacturing line. SEE THE VIDEO
Article Published: 5/1/2012
NASF REPORT: Is EPA Playing Dirty With Chromium Data?
NASF’s Jeff Hannapel and Christian Richter point to major flaws, bad precedent in EPA chromium air rule. NASF leaders have submitted a 100-page package of comments to the EPA in response to the agency’s proposed rule for chromium finishing operation...
Article Published: 5/1/2012
Finding Lost Profits In Your Finishing Line
The finishing division of White Castle restaurants teamed with Profit Finders, a continuous improvement company specializing in data collection and analysis, to look at ways to increase process efficiencies.
Article Published: 5/1/2012
Sand + Snow Makes Pretreatment Essential
Polaris' finishing department made sure its cleaning and pretreatment process was doing the job right before they electrocoated and powder coated popular off-road vehicles, snowmobiles, motorcycles and military vehicles. SEE THE VIDEO
Article Published: 5/1/2012
PPG Industries, AkzoNobel Launch New Aerospace Coating Products
The Aerocron primer from PPG’s aerospace coatings group is the first e-coat primer for airframe manufacturers and subcontractors; AkzoNobel’ Metaflex SP brand is a result of a two-year partnership between AkzoNobel Aerospace Coatings and Pantheon En...
Article Published: 5/1/2012
Are Ionic Liquids Right for Your Parts Cleaning Job?
Ionic liquids have also been considered for parts cleaning applications because of their negligible vapor pressure, high thermal and electrochemical stability, and low melting points of less than 100°C.
Article Published: 4/1/2012
Solving Wide-Body E-Coat Immersion Problems
Altec Industries in Burnsville, N.C., a manufacturer of heavy truck bodies and related equipment, added e-coat to its finishing operation and—through the proper design and execution of an electrocoat/liquid spray topcoat paint system —addressed issu...
Article Published: 4/1/2012
Meeting the Critical Cleaning Challenge
Today’s parts cleaning industry faces numerous challenges that can make the selection of an effective critical cleaning system difficult
Article Published: 4/1/2012
A “Bizarre” Approach: Using Moisture to Cure CARC Coatings
When veteran inventors Mike Bunnell and Daryl Bruischat put their minds together to build a better mousetrap for the drying and curing of waterborne CARC paints, they both hoped to come up with a system that might change the industry somewhat.
Article Published: 2/1/2012

« Prev | | Next »

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2015

Subscribe | Advertise | Contact Us | All Rights Reserved