[ Log On ]
Exploring the: Electrocoating Zone
|
Sort by: |
- Sand + Snow Makes Pretreatment Essential
- Polaris' finishing department made sure its cleaning and pretreatment process was doing the job right before they electrocoated and powder coated popular off-road vehicles, snowmobiles, motorcycles and military vehicles. SEE THE VIDEO
Article Published: 5/1/2012
- NASF REPORT: Is EPA Playing Dirty With Chromium Data?
- NASF’s Jeff Hannapel and Christian Richter point to major flaws, bad precedent in EPA chromium air rule. NASF leaders have submitted a 100-page package of comments to the EPA in response to the agency’s proposed rule for chromium finishing operation...
Article Published: 5/1/2012
- Cyklos Building a Better Finishing Machine
- Tornos rolls out its turnkey surface finishing machine, Cyklos, a self-contained apparatus that enables machining shops to integrate wet electrochemical or chemical surface processing into their manufacturing line. SEE THE VIDEO
Article Published: 5/1/2012
- PPG Industries, AkzoNobel Launch New Aerospace Coating Products
- The Aerocron primer from PPG’s aerospace coatings group is the first e-coat primer for airframe manufacturers and subcontractors; AkzoNobel’ Metaflex SP brand is a result of a two-year partnership between AkzoNobel Aerospace Coatings and Pantheon En...
Article Published: 5/1/2012
- Are Ionic Liquids Right for Your Parts Cleaning Job?
-
Ionic liquids have also been considered for parts cleaning applications because of their negligible vapor pressure, high thermal and electrochemical stability, and low melting points of less than 100°C.
Article Published: 4/1/2012
- Solving Wide-Body E-Coat Immersion Problems
- Altec Industries in Burnsville, N.C., a manufacturer of heavy truck bodies and related equipment, added e-coat to its finishing operation and—through the proper design and execution of an electrocoat/liquid spray topcoat paint system —addressed issu...
Article Published: 4/1/2012
- Meeting the Critical Cleaning Challenge
- Today’s parts cleaning industry faces numerous challenges that can make the selection of an effective critical cleaning system difficult
Article Published: 4/1/2012
- Just How Clean Is Clean?
- Most finishing consultants have lost count of the number of times that inadequate cleaning and pretreatment was the cause of defective painting or plating. Skip plating, blistering, delamination—these are just some of the commonly found defects caus...
Article Published: 2/1/2012
- Adding E-Coat to an Existing Powder Coating Line
- If sales for your finishing business have been declining, you may need to consider adding a new coating line to bring in new business. An option may be to add an electrocoat system to your current powder line to increase your coating capabilities.
Article Published: 2/1/2012
- A “Bizarre” Approach: Using Moisture to Cure CARC Coatings
- When veteran inventors Mike Bunnell and Daryl Bruischat put their minds together to build a better mousetrap for the drying and curing of waterborne CARC paints, they both hoped to come up with a system that might change the industry somewhat.
Article Published: 2/1/2012
Loading the player ...
