[ Log On ]
Exploring the: Electrocoating Zone
|
Sort by: |
- Waste Treatment for Paint Stripping
- How can we remove paint sludge and color and neutralize the pH from paint stripping acid before discharging waste to a storm drain?
Ask an Expert Published: 9/6/2012
- Quoting E-Coat Costs
- How can I quote e-coating a product line for a customer based on an average square-foot price without analysis of the parts?
Ask an Expert Published: 9/5/2012
- Temperature Limits for E-Coated Parts
- What are the temperature limitations for electrocoated parts and products?
Ask an Expert Published: 9/4/2012
- E-Coat Film Thickness Capabilities
- What are the film thickness capabilities for an electrocoat? What are the maximum and minimum film thicknesses a system can obtain? What bath parameters can change the quantity of film deposited?
Ask an Expert Published: 6/5/2012
- Low pH in E-Coat Bath
- We are coating parts in a cathodic epoxy electrocoat with a very low pH. How can we increase the pH in our tank and improve the quality of our coating?
Ask an Expert Published: 6/4/2012
- Measuring E-Coat Cure
- What are the different ways to measure electrocoat cure? We use solvent rubs but, depending on the solvent, we obtain better or worse results of cure. How do we interpret this and what other tests can we do?
Ask an Expert Published: 2/28/2012
- Coating Copper and Magnesium
- Can electrocoat be used to coat copper and magnesium substrates? Do you know of any commercial applications using those metals?
Ask an Expert Published: 2/27/2012
- E-Coating Zinc Stampings
- We are running an automatic electrocoat system coating zinc stampings. What are the best operating practices to successfully electrocoat these parts?
Ask an Expert Published: 11/23/2011
- Drop in Film Thickness
- We recently found that film thickness across the board at our e-coat plant has massively decreased, from 35 microns to around 27 microns.
Ask an Expert Published: 8/26/2011
- Blisters During Corrosion Testing
- We are coating parts that are hot-dip galvanized, and we fail corrosion tests because we develop blisters. How can we investigate the root cause?
Ask an Expert Published: 8/26/2011
Loading the player ...
