xxx


« Prev | | Next »

Sort by:


Jack Horner, a well-known expert in finishing industry, passes away
As technical director of Allied Kelite, Horner wrote training modules and authored the technical service modules on copper plating, zinc plating and bright nickel plating.
News Published: 6/27/2016
Gold Plating Services Installs Technic ENEPIG Process
With the addition of the electroless palladium to the existing TechniPad ENIG process, GPS says it is capable of providing a service exceeding both IPC 4552 for ENIG and IPC 4556 for ENEPIG.
News Published: 6/13/2016
TOP SHOPS: Professional Plating
Established in 1979 by Bob and Pat Endries, founders of Endries International, who were looking for a dependable source of plating for the fasteners supplied to their customers.
News Published: 11/1/2015
Hatched in Europe, REACH Regulations Impact U.S. Auto Manufacturers
U.S. auto makers are not obligated to comply with REACH, but a gradual or phased-in global solution is a practical approach.
News Published: 8/25/2015
Enthone Wear-Resistant Coatings Seminar Intrigues
The seminar included separate sessions on extended life, lead-free electroless nickel technologies for the oil and gas industry and high efficiency hard chrome processes.
News Published: 6/5/2015
Uyemura International Appoints Regional Representative
Scott Griggs and his company, International Process Technologies LLC, will represent the company’s technologies in the Upper Midwest.
News Published: 3/5/2015
Metal Finisher Reaches Agreement with Air Board
Hixson Metal Finishing and SCAQMD reached an agreement over air emissions at the Newport Beach, California, finishing plant.
News Published: 6/1/2014
Sam Huffman passes; Was Founder of CAPSCO, Carolina Plating and Stamping Co.
Formerly Carolina Plating and Stamping Co., Huffman was a longtime member of AESF, NAMF and NASF.
News Published: 3/17/2014
Rick Stuhler Appointed Global Product Line Manager, Enthone MID and Connectors
Stuhler will be responsible for leading new product introductions, maintaining strategic equipment and material supplier relationships, and working closely with the Enthone regional teams to ensure optimum value for applicators and OEMs.
News Published: 3/5/2014
Lloyd Ploof Joins Metal Chem Inc.
Lloyd Ploof has joined Metal Chem Inc. as a regional sales manager and technical service provider for the Northeast and Midwest U.S.
News Published: 2/19/2014

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2016

Subscribe | Advertise | Contact Us | All Rights Reserved