« Prev | | Next »

Sort by:


Grinding Out a Polished Finish
Enerquip installed a special two-head OD polisher built by Grinding and Polishing Machinery of Indianapolis, Ind., a specialist in designing and building industrial grinding and polishing machinery. It uses the stainless pipes for the sanitary-grade...
Article Published: 12/1/2012
Turbo-Charged Abrasive Machining Offers Uniformity, Consistency
Method can deburr, produce edge contour effects rapidly
Article Published: 6/1/2012
Drag Finishing of Delicate Parts
For complex parts with high surface finish specs, production deburring and surface prep can be done using the drag finishing process whereby the parts to be deburred and finished are mechanically dragged through the media while attached to fixtures—...
Article Published: 10/1/2011
Increasing Vibratory Efficiency by Optimizing the Choice of Media Shape Relative to Part Geometry
When choosing vibratory media, understand the size, shape, starting roughness condition and metallurgical structure of the part.
Article Published: 7/13/2011
Making the Grade With Mechanical Media
Understanding media grades is important to good mechanical finishes.
Article Published: 7/1/2011
Chemically Accelerated Vibratory Surface Finishing (CAVSF) with Oxalic Acid-Based Solutions
It has been shown that the inexpensive chemically accelerated vibratory surface finishing (CAVSF) process can reduce the average surface roughness.
Article Published: 5/18/2011
Be All You Can Be
For fabricators, the finishing line is just the beginning of a new era in today's market. The days of simply cutting, bending and welding metal components into assemblies and delivering them to a customer in two to three weeks just don't exist anymo...
Article Published: 3/1/2011
Mass Finishing: What is it All About?
The choices in equipment, media and compounds for your applications.
Article Published: 2/21/2011
Better Peening Shouldn’t Be a Shot in the Dark
Almost any pilot will tell you that when it comes to airplane parts like wings or engine blades, failure is unacceptable. That’s why more aerospace companies have sought to reduce the possibility of metal fatigue in such critical parts, and why some...
Article Published: 12/1/2010
Loop ’d Loop
Amusement park ride or industrial process?
Article Published: 6/1/2002

« Prev | | Next »


Schaffner Mfg. Co., Inc.

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2016

Subscribe | Advertise | Contact Us | All Rights Reserved