New Vibratory Finishing Compound Wearing Down Too Fast
What component of the compound causes this accelerated media wear and could it also harm machine parts such as the urethane liner?
When to Change Out Chemical Tanks
Question:
How do you determine when it is time to change out chemical tanks.
#basics
Passivate Stainless Steel
Question:
I have been told that it is not necessary to passivate 316 S.S., but that 303 and 304 must be to provide a corrosion resistant surface.
Gear Media
Gear Media
Question:
I have heard the term, “gear media” and I wonder what this is.
Vibratory Finishing
Question:
Is there any rule of thumb for how many parts to put in a vibratory machine?
Cleaning Copper Parts
Question:
Some of our copper parts, which have been cleaned but not protected by a chemical reagent but cased by vacuum bag, take on a bad appearance after three days.
#pollutioncontrol #vacuum-vapor
Particle Counters
Question:
We have seen a number of our customers switch from a washdown weight and visual particle count to a laser particle counter.
Ball Burnishing Vibrators
Question:
We have an eight-cu ft, tub-style vibratory finisher for burnishing stampings prior to decorative plating.
Motor Rotation for Vibratory Finishing Machine
Question:
We bought a used round vibratory finishing machine and cannot find any indication of the proper motor rotation.
Mass Finishing for Beginners
Question:
What are some applications for mass finishing that I can relate to?