« Prev | | Next »

Sort by:


The Call of Heavy Duty Coatings
PPG renews its commitment to heavy-duty equipment coatings with Caterpillar as it is selected the company’s industrial coatings business as the sole heavy-duty equipment coatings supplier for a new motor grader assembly plant in North Little Rock, A...
Article Published: 11/1/2012
A Perfect Case For Removing Sludge From Pretreatment
Chemical change ends sludge buildup for CNH coating line in plant in Fargo, N.D. as the company re-engineered their paint line’s pretreatment system to improve its performance and reduce costs, a process that took nearly two years and numerous trial...
Article Published: 11/1/2012
Stopping Paint Line Bottlenecks
New Exel system on paint line improves efficiency by 95 percent
Article Published: 9/1/2012
COATINGS 2012 Preview: Meet the Coaters in St. Louis
COATING 2012 has unique activities to go along with 50+ technical sessions.
Article Published: 9/1/2012
2K Paint System Is A-OK
Switching to a 2K system proves cost-effective for computer makes large, complex industrial compression equipment that requires a durable finish that is corrosion-proof and chemically resistant.
Article Published: 8/1/2012
Concrete Evidence for Proper Pretreatment Before Painting
Road construction equipment maker Gomaco gets better adhesion, more efficient line after getting the right cleaning and pretreatment system in place that could help deliver high-quality products, while at the same time offer increased efficiencies.
Article Published: 8/1/2012
An Introduction to Cyclic Corrosion Testing
CCT is intended to be a more realistic way to perform salt spray tests than traditional, steady-state exposures. Here's a more realistic way to perform salt spray tests traditional, steady-state exposures
Article Published: 7/1/2012
Painting Proportioners Becoming Popular With Finishers
Offer high ratio accuracy, various flow rates
Article Published: 6/1/2012
Accelerating Topcoats for Aerospace Specifications
Bayer’s UV-A curable coatings provide rapid cure rate, high performance
Article Published: 6/1/2012
Shipshape Testing: Software Meets IMO PSPC Requirements.
\New regulations apply to seawater ballast tanks of all types of ships of not less than 500 gross tonnage, and double-side skin spaces arranged in bulk carriers of 150 meters in length and upwards
Article Published: 4/1/2012

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved