« Prev | | Next »

Sort by:

2K Paint System Is A-OK
Switching to a 2K system proves cost-effective for computer makes large, complex industrial compression equipment that requires a durable finish that is corrosion-proof and chemically resistant.
Article Published: 8/1/2012
Concrete Evidence for Proper Pretreatment Before Painting
Road construction equipment maker Gomaco gets better adhesion, more efficient line after getting the right cleaning and pretreatment system in place that could help deliver high-quality products, while at the same time offer increased efficiencies.
Article Published: 8/1/2012
An Introduction to Cyclic Corrosion Testing
CCT is intended to be a more realistic way to perform salt spray tests than traditional, steady-state exposures. Here's a more realistic way to perform salt spray tests traditional, steady-state exposures
Article Published: 7/1/2012
Painting Proportioners Becoming Popular With Finishers
Offer high ratio accuracy, various flow rates
Article Published: 6/1/2012
Accelerating Topcoats for Aerospace Specifications
Bayer’s UV-A curable coatings provide rapid cure rate, high performance
Article Published: 6/1/2012
Shipshape Testing: Software Meets IMO PSPC Requirements.
\New regulations apply to seawater ballast tanks of all types of ships of not less than 500 gross tonnage, and double-side skin spaces arranged in bulk carriers of 150 meters in length and upwards
Article Published: 4/1/2012
Taking It to the Max: Throughput changes that amount to 300% finishing improvement.
When it comes to getting maximum throughput and optimal first pass yield from their finishing departments, Metalcraft of Mayville has quite a story to tell.
Article Published: 3/1/2012
Military “STARs” Are Born With Paint Facilities
The Yermo Annex Marine Corps. Logistics Base in California and the Corpus Christi Army Depot Aviation Center in Texas have acquired new systems to help train and enhance employees’ painting abilities.
Article Published: 2/1/2012
A “Bizarre” Approach: Using Moisture to Cure CARC Coatings
When veteran inventors Mike Bunnell and Daryl Bruischat put their minds together to build a better mousetrap for the drying and curing of waterborne CARC paints, they both hoped to come up with a system that might change the industry somewhat.
Article Published: 2/1/2012
Tackoff: In Pursuit of the Perfect Paint Job
When it comes to today’s vehicles, a high quality paint finish is the first thing a consumer notices. The automotive industry is constantly improving its paint shop either by upgrading existing facilities or by building new ones to take advantage of...
Article Published: 1/1/2012

« Prev | | Next »

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2015

Subscribe | Advertise | Contact Us | All Rights Reserved