« Prev | | Next »

Sort by:

Painting Transformer Radiators
Can you recommend a reliable company that can supply the equipment and install a line that would be able to paint corrugated tank radiators?
Ask an Expert Published: 5/8/2013
Dip Tank Agitation
What is the best circulation pattern for paint with a 43 percent solids-by-volume content to obtain optimum consistency and to minimize or prevent settlement?
Ask an Expert Published: 3/20/2013
Spray Gun Flow Rate Problem
How do we achieve consistent paint flow through our spray guns?
Ask an Expert Published: 1/17/2013
New Painting Facilities
We are looking at options fro replacing a spray painting line and have been considering installing an electrocoat line to replace spray priming. What kind of trouble can we expect on startup?
Ask an Expert Published: 12/12/2012
Spraying High-Viscosity Paints
We have problems getting a consistently even distribution of a high-viscosity paint in the spray pattern, resulting in striping on the sprayed parts. To get better results, we are currently adding reducing solvents to lower the paint’s viscosity for...
Ask an Expert Published: 12/4/2012
We are considering revamping our paint finishing line and were wondering if we could use the autodeposition process described in the July issue of Products Finishing to paint our products.
Ask an Expert Published: 11/8/2012
Phosphating Dust and Overspray
How can we cut phosphating dust after zinc phosphate and passivating stages, and reduce overspray losses in our water wash spray booth?
Ask an Expert Published: 10/29/2012
Painting Radiators
Is spray painting the best option for getting paint onto cooling radiators, and if so, what type of spray guns or special nozzles do you recommend?
Ask an Expert Published: 10/1/2012
Painting Q&A: Big Spray Paint Job
I am looking for equipment to spray a two-coat paint system on a large surface measuring approximately 30 × 30 ft.
Ask an Expert Published: 7/6/2012
Spraying Small Parts
What would be the recommended spray gun equipment for applying coatings per MIL-PRF-22750, DOD-P-15328 and MIL-DTL-53022 specifications to our components and subsystem for military applications?
Ask an Expert Published: 6/13/2012

« Prev | | Next »

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2015

Subscribe | Advertise | Contact Us | All Rights Reserved