« Prev | | Next »

Sort by:

New Painting Facilities
We are looking at options fro replacing a spray painting line and have been considering installing an electrocoat line to replace spray priming. What kind of trouble can we expect on startup?
Ask an Expert Published: 12/12/2012
Spraying High-Viscosity Paints
We have problems getting a consistently even distribution of a high-viscosity paint in the spray pattern, resulting in striping on the sprayed parts. To get better results, we are currently adding reducing solvents to lower the paint’s viscosity for...
Ask an Expert Published: 12/4/2012
We are considering revamping our paint finishing line and were wondering if we could use the autodeposition process described in the July issue of Products Finishing to paint our products.
Ask an Expert Published: 11/8/2012
Phosphating Dust and Overspray
How can we cut phosphating dust after zinc phosphate and passivating stages, and reduce overspray losses in our water wash spray booth?
Ask an Expert Published: 10/29/2012
Painting Radiators
Is spray painting the best option for getting paint onto cooling radiators, and if so, what type of spray guns or special nozzles do you recommend?
Ask an Expert Published: 10/1/2012
Painting Q&A: Big Spray Paint Job
I am looking for equipment to spray a two-coat paint system on a large surface measuring approximately 30 × 30 ft.
Ask an Expert Published: 7/6/2012
Spraying Small Parts
What would be the recommended spray gun equipment for applying coatings per MIL-PRF-22750, DOD-P-15328 and MIL-DTL-53022 specifications to our components and subsystem for military applications?
Ask an Expert Published: 6/13/2012
Coating Textile Braids
In our manufacturing process we apply adhesive coatings over certain textile braid for reinforced rubber hose constructions. On other hose items, we apply a lacquer coating over the textile braid. In order to dry out the lacquer coatings, the hose t...
Ask an Expert Published: 3/5/2012
Dip-Spin Painting Method
I am the machine shop supervisor for a company that makes indoor exercising equipment. Some of the component parts are electroplated while others are painted. We buy these parts already painted since we have no painting equipment in our shop at this...
Ask an Expert Published: 2/27/2012
Least-Expensive Finish System
One of our customers is inquiring about the least expensive, most easily applied and most corrosion resistant finish system for steel parts. He needs to have good protection against the effects of seaside atmospheres. The parts will be exposed to te...
Ask an Expert Published: 2/21/2012

« Prev | | Next »

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2015

Subscribe | Advertise | Contact Us | All Rights Reserved