« Prev | | Next »

Sort by:


Waterborne painting process is a first at South Carolina BMW plant
PPG launched the first use of waterborne compact paint technology in a U.S. automotive manufacturing plant at the BMW assembly plant in Spartanburg, S.C. This painting process has turned out to be a 2012 award winner and has opened up a new way for ...
Article Published: 1/1/2013
PPG Using Selectively Strippable System For RAF
RAF has taken delivery of the first Airbus Military A330 Multi-Role Tanker Transport aircraft painted with high-solids Desoprime CF/CA 7049 chromate-free primer, F565-4010 selectively strippable intermediate coat, and high-solids Desothane HS/CA 820...
Article Published: 12/1/2012
Concrete Evidence for Proper Pretreatment Before Painting
Road construction equipment maker Gomaco gets better adhesion, more efficient line after getting the right cleaning and pretreatment system in place that could help deliver high-quality products, while at the same time offer increased efficiencies.
Article Published: 8/1/2012
PPG Industries, AkzoNobel Launch New Aerospace Coating Products
The Aerocron primer from PPG’s aerospace coatings group is the first e-coat primer for airframe manufacturers and subcontractors; AkzoNobel’ Metaflex SP brand is a result of a two-year partnership between AkzoNobel Aerospace Coatings and Pantheon En...
Article Published: 5/1/2012
Sand + Snow Makes Pretreatment Essential
Polaris' finishing department made sure its cleaning and pretreatment process was doing the job right before they electrocoated and powder coated popular off-road vehicles, snowmobiles, motorcycles and military vehicles. SEE THE VIDEO
Article Published: 5/1/2012
Are Ionic Liquids Right for Your Parts Cleaning Job?
Ionic liquids have also been considered for parts cleaning applications because of their negligible vapor pressure, high thermal and electrochemical stability, and low melting points of less than 100°C.
Article Published: 4/1/2012
Meeting the Critical Cleaning Challenge
Today’s parts cleaning industry faces numerous challenges that can make the selection of an effective critical cleaning system difficult
Article Published: 4/1/2012
Just How Clean Is Clean?
Most finishing consultants have lost count of the number of times that inadequate cleaning and pretreatment was the cause of defective painting or plating. Skip plating, blistering, delamination—these are just some of the commonly found defects caus...
Article Published: 2/1/2012
Tackoff: In Pursuit of the Perfect Paint Job
When it comes to today’s vehicles, a high quality paint finish is the first thing a consumer notices. The automotive industry is constantly improving its paint shop either by upgrading existing facilities or by building new ones to take advantage of...
Article Published: 1/1/2012
PCX PREVIEW: Precision Cleaning
In the finishing world, there are four common precision cleaning processes: hydrocarbon, aqueous, semi-aqueous, and vapor degreasing. Each has its strengths and disadvantages, but one of the biggest problems with aqueous and semi-aqueous cleaning is...
Article Published: 4/1/2011

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved