[ Log On ]
Exploring the: Coatings Zone
|
Sort by: |
- Scuffing Of Matte Finishes
- How can I scientifically explain why matte finishes scuff more easily than gloss finishes?
Ask an Expert Published: 3/29/2013
- Sand Finish on Aluminum
- My specialty metal shop is in the process of quoting a job to provide aluminum profiles coated with a sand-effect paint, both in color and texture. What paint do you recommend?
Ask an Expert Published: 3/26/2013
- Painting Particle Board
- I am looking for a paint or coating that can be used to coat the surface of the particle board panels in a production line environment after finish sanding and prior to a paper laminating process.
Ask an Expert Published: 2/27/2013
- Curing Polyurethane on Wood
- Can you help us find a polyurethane varnish that will cure in our warm-air oven?
Ask an Expert Published: 2/26/2013
- Coating PVC Products
- My company manufactures a line of products fabricated from black PVC irrigation pipe, and I would like to be able to offer these products in colors other than black. The coating must be abrasion-resistant enough to withstand metal and plastic object...
Ask an Expert Published: 2/11/2013
- Low Phosphate Coating Weight
- We are getting a low coating weight with an immersion zinc phosphate coating. Could pH be a factor in this issue?
Ask an Expert Published: 12/10/2012
- Hot Alkali-Resistant Coating
- I am a commercial painting contractor and have a customer who is installing a stainless steel tank that will contain a hot alkali solution. The process will be run at about 98ºC. I am looking for a coating to stand up to a hot caustic solution at a ...
Ask an Expert Published: 11/29/2012
- Coating Plated Zinc Jewelry
- What is the best way to apply a clear hard coat for durability on plated pieces of zinc jewelry?
Ask an Expert Published: 11/1/2012
- Painting Fishing Lures
- What are the best undercoat and finish coat to use on stainless steel fishing lures?
Ask an Expert Published: 9/27/2012
- Applying Gel Coats
- Is it possible to apply paint into the SMC molding process which satisfies 0.4 mm paint thickness and a minimum surface hardness of 4H?
Ask an Expert Published: 9/17/2012