« Prev | | Next »

Sort by:

Coating PVC Products
My company manufactures a line of products fabricated from black PVC irrigation pipe, and I would like to be able to offer these products in colors other than black. The coating must be abrasion-resistant enough to withstand metal and plastic object...
Ask an Expert Published: 2/11/2013
Low Phosphate Coating Weight
We are getting a low coating weight with an immersion zinc phosphate coating. Could pH be a factor in this issue?
Ask an Expert Published: 12/10/2012
Hot Alkali-Resistant Coating
I am a commercial painting contractor and have a customer who is installing a stainless steel tank that will contain a hot alkali solution. The process will be run at about 98ºC. I am looking for a coating to stand up to a hot caustic solution at a ...
Ask an Expert Published: 11/29/2012
Coating Plated Zinc Jewelry
What is the best way to apply a clear hard coat for durability on plated pieces of zinc jewelry?
Ask an Expert Published: 11/1/2012
Painting Fishing Lures
What are the best undercoat and finish coat to use on stainless steel fishing lures?
Ask an Expert Published: 9/27/2012
Applying Gel Coats
Is it possible to apply paint into the SMC molding process which satisfies 0.4 mm paint thickness and a minimum surface hardness of 4H?
Ask an Expert Published: 9/17/2012
Why Paint Stainles Steel?
Are air-dry epoxy coatings suitable for application on 304 and 316 stainless steel materials?
Ask an Expert Published: 9/14/2012
Controlled Skinning
Can you recommend a low-cost, industrial, clear glossy alkyd medium that can produce the skinning effect you get with some stored alkyd paints?
Ask an Expert Published: 9/12/2012
Painting Stainless Steel
We are concerned about paint adhesion on equipment cabinets made of mostly 41003 (a utility-grade stainless steel that is 12 percent Cr) and either 304 or 201 for the hard-to-draw parts.
Ask an Expert Published: 7/31/2012
Stirred, Not Shaken
My group has responsibility for process specification BAC5736 regarding mixing of an epoxy primer. Here is my interpretation of the specification.
Ask an Expert Published: 7/30/2012

« Prev | | Next »

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved