Exploring the: Coatings Zone
128 Results for: New ProductSort by:
Handheld Thickness Gages Measure Coating Thickness on Variety of Substrates
Gardco introduces the new CMI155 and CMI157 thickness gages that measure the thickness of single layer coatings or the total thickness of applied coatings on iron, steel, aluminum and other metal substrates.
Diamond-Based Coatings System Utilizes Both PVD and PECVD
Duralar Technologies introduces its Centurion deposition system designed for cost-efficient deposition of hard and decorative coatings on parts as large as one meter squared in volume production.
Low-Pressure Airless Tip Extends Spray Life
The new HEA (High Efficiency Airless) TR1 reversible airless tip features tip technology and is said to enable spraying at lower pressures, delivering total control and extending sprayer life.
Automatic Stormer-Type Viscometer Offers Speed Control
The viscometer automatically starts and stops the motor shaft rotation by lowering or raising the instrument stand.
Coating Thickness Gage Inspects Concrete Substrates
According to Elcometer, its coatings thickness gage supports the non-destructive measurement of dry film thickness on concrete quickly and accurately.
Rotational Viscometer Measures Viscosity, Analyzes Time-Dependent Fluids
Paul N. Gardner Co. introduces its rotational viscometers that measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid.
Valmont Coatings Showcases Variety of Finishes
Valmont Coatings is a full-service coating company specializing in hot-dip galvanizing, powder coating, anodizing, liquid coating and ecoat finishes.
Large-Volume Walk-In Oven Used for Curing Parts
Grieve’s No. 850 walk-in oven features 4" insulated walls, aluminized steel interior and exterior, plus a 2" insulated floor with integral truck wheel guide tracks for easier loading and unloading.
Sherwin-Williams Introduces Polane D 8700 Direct-to-Metal
Sherwin-Williams, through its Product Finishes Division, introduces Polane D 8700.
Direct-To-Metal Coating Matches Primer-Topcoat System Performance
Spectracron SPM coating is engineered for direct application to pretreated metal substrates while providing corrosion resistance comparable to traditional two-component primer-topcoat systems.