Curing

Exploring the: Curing Zone

41 Results for: Article

Sort by:
Published: 3/1/2014

What’s Next for the Aerospace NESHAP?
Will it be business as usual or are major changes in store for the aerospace industry as feds look at 40 CFR Part 63 Subpart GG, commonly referred to as the Aerospace National Emission Standard for Hazardous Air Pollutants, or NESHAP.

Published: 2/1/2014

Infrared Curing: Evaluating the characteristics of IR energy
Infrared (IR) energy can be used as a source of heat to cure a variety of industrial coatings. Such infrared curing applies energy to the coated part surface by direct transmission from an IR emitter, which can provide source temperatures of anywher...

Published: 9/1/2013

Take the Paint Efficiency Audit
Achieve cost savings through more efficient finishing operations. As finishing operations look to stay competitive in an increasingly global economy, it’s no surprise that efficiency has become a popular topic.

Published: 8/1/2013

Powder Coaters Hope Second Time is the Charm
STP Performance Coatings in Phoenix takes a chance on expansion.

Published: 3/1/2013

Nanotechnologies Address Pipe Corrosion
The boom in the gas and oil business, both in the United States and globally, has refocused attention on efforts to reduce corrosion on the surfaces of pipes and equipment used in the industry.

Published: 1/1/2013

Waterborne painting process is a first at South Carolina BMW plant
PPG launched the first use of waterborne compact paint technology in a U.S. automotive manufacturing plant at the BMW assembly plant in Spartanburg, S.C. This painting process has turned out to be a 2012 award winner and has opened up a new way for ...

Published: 11/1/2012

A Perfect Case For Removing Sludge From Pretreatment
Chemical change ends sludge buildup for CNH coating line in plant in Fargo, N.D. as the company re-engineered their paint line’s pretreatment system to improve its performance and reduce costs, a process that took nearly two years and numerous trial...

Published: 9/1/2012

Stopping Paint Line Bottlenecks
New Exel system on paint line improves efficiency by 95 percent

Published: 8/1/2012

2K Paint System Is A-OK
Switching to a 2K system proves cost-effective for computer makes large, complex industrial compression equipment that requires a durable finish that is corrosion-proof and chemically resistant.

Published: 6/1/2012

Accelerating Topcoats for Aerospace Specifications
Bayer’s UV-A curable coatings provide rapid cure rate, high performance