« Prev | | Next »

Sort by:

Painting Q&A: Recirculating Air
Why should you recirculate the air in a paint booth?
Ask an Expert Published: 12/1/2015
Painting Q&A: Decreasing Energy Usage in Paint Lines
How to decrease energy use.
Ask an Expert Published: 9/1/2015
Painting Q&A: Formaldehyde-Free Coatings
Benefits of formaldehyde-free coatings.
Ask an Expert Published: 9/1/2015
Proper Booth Filtration
Lately, it seems that we have had to change our filters a lot to maintain good airflow through the booth. What is the proper filter that we should be using, and how often should a typical filter be changed?
Ask an Expert Published: 5/1/2015
Spray Booth Compliance
What does it mean to have a paint booth third-party listed?
Ask an Expert Published: 3/1/2015
Recently, I read that: “The VOC ratings for paint were created to address ozone depletion and smog; VOCs that affect health, but not the atmosphere, are EXEMPT from the calculation.” Is this true? Or are low-VOC paints healthier for my workers?
Ask an Expert Published: 3/1/2015
Thermal Oxidizer
Our client has an RTO on its aluminum window frame painting line, and we supplied a total hydrocarbon analyzer to meet compliance. We get a huge spike in the readings when the RTO chambers cycle every four minutes. We can go from 3 to 6 ppm for four...
Ask an Expert Published: 9/26/2012
Controlling VOC Emissions
We have had complaints from neighbors about paint odors coming from our plant. Can you suggest anything to reduce the possibility of paint or paint odors escaping through the roof stacks?
Ask an Expert Published: 3/31/2011
Spray Booth Selection
I would be obliged if you could advise me on which of the following two spray booths is best for my application.
Ask an Expert Published: 2/18/2011
Better Transfer Efficiency
To protect and preserve the brass plating, we coat these parts with a clear lacquer using a conventional air spray gun. Needless to say, we get poor coverage on the parts with a lot of overspray. Consequently we use a lot of lacquer. Because of the ...
Ask an Expert Published: 1/11/2011

« Prev | | Next »

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2015

Subscribe | Advertise | Contact Us | All Rights Reserved