« Prev | | Next »

Sort by:


Soaring to New Aerial Paint Heights
PPG, Sherwin-Williams release improved aerospace paint
Article Published: 12/1/2011
Reducing the Chance of Spray Booth Fires
In the finishing industry, there is a real connection between safety and quality—especially when it comes to spray booths, which can run the risk of causing fire if not properly maintained. A review of basic safety precautions, plus a look at the Na...
Article Published: 12/1/2011
Today’s Paint-Application Methods
An overview of spraying, dipping, flow coating, and everything in between.
Article Published: 9/29/2011
Liquid Coatings
Formulation fundamentals and options for environmentally preferable finishing
Article Published: 9/29/2011
Color-Changing Paints Show Safety Benefits for Soldiers
Military using ‘thermal indicating paints’ on ammunition.
Article Published: 7/1/2011
F-35 Gets New Paint System
Robots now control all the moves.
Article Published: 5/1/2011
Painting on Oil ... Rigs that is
When part-time oilman Terry McIver went to Brady, TX in 2004 to buy a used drilling rig, he was surprised to find the company he was visiting was going bankrupt and had just two employees left from over 200 it had a year earlier.   Brady left...
Article Published: 4/1/2011
Getting a Good Finish Begins with a Great Start
Virtually all metal parts and many plastic parts have some sort of finish applied to them. These finishes are applied to improve appearance, increase corrosion resistance and enhance wear resistance.
Article Published: 3/2/2011
A Shop for All Reasons
When Dennis Doane started his new metal fabricating endeavor in 2003, he selected the name A-1 Fabricators and Finishers for his Cincinnati-area company. It also helped years later, now that he has added a powder coating line to his repertoire.
Article Published: 3/2/2011
Be All You Can Be
For fabricators, the finishing line is just the beginning of a new era in today's market. The days of simply cutting, bending and welding metal components into assemblies and delivering them to a customer in two to three weeks just don't exist anymo...
Article Published: 3/1/2011

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2015

Subscribe | Advertise | Contact Us | All Rights Reserved