[ Log On ]
Exploring the: Painting Processes Zone
|
Sort by: |
- Painting Tank Interiors
- Some of the tank interior floors receive a paint touch-up after testing and before shipping because people walk on the inside during the inspection. Recently, I got a customer complaint of soft uncured paint on the tank floor when it was opened for ...
Ask an Expert Published: 2/18/2011
- Spray Booth Selection
- I would be obliged if you could advise me on which of the following two spray booths is best for my application.
Ask an Expert Published: 2/18/2011
- Painting Over Powder Coating
- How safely can they apply their wet paint over our powder coated parts?
Ask an Expert Published: 2/18/2011
- Metallics Appearance Repeatability
- We make a line of scientific instruments and are in the process of introducing a new line. We are having some issues with a gold metallic paint used on them, in terms of the repeatability of its appearance. Since we don’t do painting in-house, the p...
Ask an Expert Published: 2/18/2011
- Going Fishing
- We are planning to reopen the factory and would be very pleased if you could update us on the latest painting procedures and paint materials used today so we can be competitive in the coming years.
Ask an Expert Published: 2/18/2011
- Painting Water Storage Tanks
- We have to fabricate and paint some fire protection water storage tanks. The specifications call for mill galvanized, not hot dip galvanized steel as the construction material.
Ask an Expert Published: 1/12/2011
- Wire Coat Hangers
- How do I apply flocking material?
Ask an Expert Published: 1/11/2011
- Blistering Paint
- My company produces cold rolled steel equipment boxes for both interior and exterior use. Indoor boxes are fabricated from cold rolled steel and outdoor boxes are fabricated from hot dip galvanized steel. After we upgraded our finish system from alk...
Ask an Expert Published: 1/11/2011
- Better Transfer Efficiency
- To protect and preserve the brass plating, we coat these parts with a clear lacquer using a conventional air spray gun. Needless to say, we get poor coverage on the parts with a lot of overspray. Consequently we use a lot of lacquer. Because of the ...
Ask an Expert Published: 1/11/2011
- Smoothing Rough Castings
- Do you have a coating that would be easy to apply and quick drying that would improve the appearance of our castings and eliminate the hand grinding?
Ask an Expert Published: 1/11/2011