Painting Processes

Exploring the: Painting Processes Zone

115 Results for: New Product

Sort by:
Published: 2/1/2017

Slippery Coating Simplifies Cleaning of Liquid Tanks, Minimizes Waste
LiquiGlide CleanTanX coatings are designed to reduce material and operating costs, minimize wastewater and fresh water use, mitigate bacterial contamination and corrosion, and decrease downtime caused by cleaning tanks between batches.

Published: 1/12/2017

Low-Pressure Airless Tip Extends Spray Life
The new HEA (High Efficiency Airless) TR1 reversible airless tip features tip technology and is said to enable spraying at lower pressures, delivering total control and extending sprayer life.

Published: 1/10/2017

Automatic Stormer-Type Viscometer Offers Speed Control
The viscometer automatically starts and stops the motor shaft rotation by lowering or raising the instrument stand.

Published: 12/5/2016

Stripping Product Dissolves Rust, Strips Coatings
D-Zolve 917 from Solvent Kleene is a multi-purpose product designed to dissolve rust as well as remove powder coatings, liquid paint, CARC and other difficult-to-strip coatings

Published: 12/1/2016

Coating Thickness Gage Inspects Concrete Substrates
According to Elcometer, its coatings thickness gage supports the non-destructive measurement of dry film thickness on concrete quickly and accurately.

Published: 11/30/2016

Rotational Viscometer Measures Viscosity, Analyzes Time-Dependent Fluids
Paul N. Gardner Co. introduces its rotational viscometers that measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid.

Published: 11/29/2016

Handheld Radiometer Measures UV and Blue Light
This radiometer can maintain stability in high temperature and intense UV flood and spot curing environments.

Published: 11/7/2016

HEMCO’s Controlled Containment Systems Protect against Contamination
“CCS” Controlled Containment Systems from HEMCO are engineered to safely contain and control airborne particulate from sampling procedures.

Published: 11/2/2016

Large-Volume Walk-In Oven Used for Curing Parts
Grieve’s No. 850 walk-in oven features 4" insulated walls, aluminized steel interior and exterior, plus a 2" insulated floor with integral truck wheel guide tracks for easier loading and unloading.

Published: 11/1/2016

Direct-To-Metal Coating Matches Primer-Topcoat System Performance
Spectracron SPM coating is engineered for direct application to pretreated metal substrates while providing corrosion resistance comparable to traditional two-component primer-topcoat systems.