« Prev | | Next »

Sort by:


The Electroless Deposition of Nickel-Phosphorus-Tungsten Alloys
This paper describes the successful electroless co-deposition of tungsten within a nickel-phosphorus matrix to yield several advantageous properties.
Article: External Published: 4/1/2014
Making the Medical Grade for Gold Plating
Gold plating delicate and micro parts involves more than just the gold plating process—extending to cleaning, rinsing, drying and inspecting the deposits on these difficult components, as well.
Article Published: 3/17/2014
Hollywood Script for LA Plater Morrell Aerospace
Cy Gipoor, whose shop specializes in aerospace finishes, sits just a few miles from the Hollywood lights in suburban Los Angeles. What was once a shuttered plating shop with no customers is now vibrant and growing, adding $2 million in new faciliti...
Article Published: 3/1/2014
Dr. Phil To The Rescue for Electroplaters
Techmetals’ president Phil Brockman is often the last electroplater that some customers visit on their search for solutions to persistent finishing issues or to plate unique parts. But it’s easy to see why most major aerospace, medical, defense, oil...
Article Published: 2/1/2014
NASF Raises Concerns over EPA Stormwater Discharge Rule
NASF has raised concerns over the proposed revisions, particularly related to the benchmark values that EPA and state agencies will be using for compliance.
Article Published: 1/1/2014
Coating by the Billions
A Raymond Tinnerman coats automotive parts fasteners and clips … a lot of them
Article Published: 1/1/2014
NASF: OSHA Proposes New Workplace Exposure Standard for Respirable Crystalline Silica
Proposed rule would establish a new PEL of 50 μg/m3 with an action level 25 μg/m3 calculated as an eight-hour time-weighted average for general industry, half of the current standard
Article Published: 12/1/2013
When Plating Meets the Jet Set
Houston plater specializes in finishing private aircraft interiors; company offers more than 130 standard finishes and unlimited custom-matching capabilities.
Article Published: 12/1/2013
NASF: OSHA’s GHS HazCom Rule
OSHA’s implementation of the Globally Harmonized System deadline for the first round of regulations fell on Dec. 1, 2013.
Article Published: 11/25/2013
Industry Groups Challenge European REACH on Chromium Trioxide
challenge alleges that the commission erred in its assessment of chromium trioxide for authorization and failed to provide an exemption for the continued use of it and other related compounds in the surface coatings industry.
Article Published: 11/1/2013

« Prev | | Next »


Pavco
American Plating Power
Luster-On Products
Insoluble Anodes
Technic Inc

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved