Electro less plating processes are considered to be much convenient, cheaper and best for deposition on parts with lot of holes, cleavages, bents, curves, abnormal shapes, threading etc., effectively and economically. Article: ExternalPublished: 8/18/2016
While today’s EN baths are much more user friendly than they were even 10 years ago, plating shops still strive to maintain consistent, trouble-free operation. The following provides a basic understanding of EN bath control. ArticlePublished: 8/1/2016
Efforts to modernize the U.S. rules for chemicals under the Toxic Substance Control Act (TSCA) have been underway for the past several years and success is near. On May 24, the House approved the compromise measure by a 403 to 12 vote. ArticlePublished: 7/1/2016
Los Angeles-based Barry Avenue Plating was founded in 1947, and Chuck Kearsley is president and Cruz Maldonado is vice president of operations. They opened BAP Aerospace in Mexico in 2012 to serve that region. ArticlePublished: 7/1/2016
Novak went from being a young chemical engineer who was hired by Anoplate out of Syracuse University to manager of the surface finishing team at Apple Inc., a Cupertino, California-based conglomerate.
Novak has reached the apex of his career (so far) as manager of the surface finishing team at Apple Inc., a Cupertino, California-based conglomerate that designs, develops and sells consumer electronics, software and online services.
Leonides started working at IPS in the late 1990s as an engineering assistant, and has since also worked as junior engineer, materials and planning supervisor and an account executive. ArticlePublished: 7/1/2016
This article is the second of three parts of a re-publication of the 16th William Blum Lecture, presented at the 62nd AES Annual Convention in Toronto, Ontario, Canada on June 23, 1975. Dr. Ernst Raub presents a comprehensive treatise on alloy plat... Article: ExternalPublished: 6/15/2016